|Topic Review (Newest First)|
|05-10-2009 09:50 AM|
I am in the middleof replacing my windows on my Mark I C&C 30. The windows were the original alluminum framed inserts. One side leaked. I am having abuddy cut replacement lexan pieces. We will urethane theseto the o/s and then I will bolt through the cabin top. Getting the olde windows out was a pain. I also re-filled the outer-inner cabin top and inside with 3M Marine 5200. I will sand finish the inside edge of the window prior to the new windows being glued in.
|03-14-2008 05:33 PM|
I'm happy that you trust our products for such an extreme journey. They won't let you down!
As for the building, I was there the day it was taken down. It was a real shame because my Great-Great-Grandfather bought that property and the small house that was on it. But when the cost of carrying a small piece of land becomes as high as it has, the small guys get driven out to make room for the yuppies I would have liked to stay there but now we have a nice place in Napanee, where the air is clean and the taxes are low!
If you want to know more about that piece of land and its history I typed up a small blurb on link on our homepage, titled History.
|03-14-2008 05:07 PM|
I'll keep that in mind as I would like to keep your portlights and hatches in for a proposed world cruise...they'll be put to the test, I'll say that much.
Call Peter at Holland Marine for the gasketing...he'll set you up. You should see what's at your former address...another stinking great condo....
|03-14-2008 12:30 PM|
|Benjamaphone||Sometimes the initial cost of excellence is high but in the long run it will pay off. The cost associated with the gasket material directly comes from the fact that it is a special high density neoprene rubber. This will last 5-10 times longer than conventional gasket material that is found in many marine stores. Also, the price of one or two gaskets will be higher than if you were to order enough to replace everything on your boat; as with everything, quantity = discount.|
|03-13-2008 10:40 PM|
Originally Posted by Tom M View Post
You'll need the "grey gasketing" common to CS, C&C and Ontario Yacht boats of that period, and you can contact Holland Marine in Toronto
Holland Marine Products
or South Shore Yachts, which has a large stock of superannuated C&C parts:
EDIT: Goddamnit, I did it again.
Anyway, Mr. Atkins, I have several of your products aboard my new-to-me steel cruiser, and while they are excellently made, you have to get the price of those replacement gaskets down!
|03-13-2008 08:31 PM|
Glad to help And your input and advice is welcome.
|03-13-2008 08:09 PM|
|Benjamaphone||I understand and apologize for not fully disclosing my professional position. Thanks for the welcome and I hope that I can add some value to these boards.|
|03-13-2008 07:40 PM|
Welcome to sailnet... good to have you here... but please read this post on the full disclosure policy on this site, as well as this post to get the most out of your time on Sailnet.
|03-13-2008 05:20 PM|
Originally Posted by Valiente View Post
Those old hatches were originally made by my father and can be found on many of the boats built in North America during that time frame. We still carry all the parts and do a lot of repairs of the old acrylic, hinges, etc.
|04-20-2007 02:11 PM|
Originally Posted by sailingdog
C&Cs have these generally inadequate fixed portlights. Most people who do heavy weather in C&Cs either bolt through 1/2" Lexan on the outside (and seal with 4200 or something tough), or get creative and glass over the entire 7 x 36" portlights (varies from model to model) and cut out two standard 7 x 14" openings for bronze or SS opening portlights, which really cool the boats down and keep the humidity lower.
C&C was generally a great boat, but their companionways and portlights aren't, being a little light in the first case for offshore and a little thin in the second case, in my opinion. The foredeck hatches, almost all made by Atkins and Hoyle (and still being made), were excellent and have stood the test of time. I have them on both my '73 and my '88 boats.
|This thread has more than 10 replies. Click here to review the whole thread.|