|Topic Review (Newest First)|
|05-02-2007 03:48 PM|
Originally Posted by capt.stu
|04-30-2007 08:17 PM|
|l0keman||I thought about maybe using the jib halyard to raise a rope ladder, but I am not sure if the mast would hold and the boat would stay upright. I definatley see the halyard holding 190 pounds plus a few pounds of rope ladder. It's just that that weight at the top of the mast would be a LOT of levrage. I guess I gotta lower the mast to run the electrical through it and put a mast head light on it anyways.|
|04-30-2007 04:51 PM|
I'd say first to print out the online manual you found. Then, take some white gaffer's tape (doesn't leave residue) or other wide tape and start putting labels on things. Lines, pulleys, hardware, the mast fittings...lay them out on the ground and try to get a name matched up on everything, with everything matched up to the instruction manual.
I know there's a lot there, most folks learn to sail "with" a boat, not by building one from a kit.
Once you get things matched up, you will have a better idea of what doesn't match. The owner additions (like that little pulley at the top) or changes that probably you should just ignore for now.
If you want to splurge...buy 100' of clothes line at a dollar store, use that to rig the two halyards and see how long each one actually needs to be. That will give you some safe numbers before you cut that monster line that has steel spliced in at both ends. The halyards need to be long enough to run all the way UP the mast, and all the way back down again, as if they were attached and the sails were lowered. Then you need enough extra line to be able to get to the correct winches or cleats as well. WIth any luck, what you've got will add up to that much.
Even if you've been sailing for years, and you get on a fully assembled
The boat looks nice and clean, in good shape overall. I'd bet you that for the price of a pizza and beer, you could get some experienced local help to come out and put it together with you. Sailors are like that--the quality of the journey counts, and the help you give comes back to you.
On getting the halyard down: Now you know why it's a good thing you don't have a bigger boat.
|04-30-2007 04:51 PM|
So anyone able to make a suggestion as to how to get the halyard back down without taking down the mast? I was thinking of attaching the jib halyard to one of those dog walking harnesses and raising up Quagmire.
|04-30-2007 03:19 PM|
Damn what a mess
I'm learning all this stuff too, so you have my sympathy.
Your cable with rope added sounds like some sort of DIY adjustable backstay. I would ask the previous owner if possible.
He/she may also have kept the actual halyards (and other hardware) if recently spent the $$$ to run all lines to the cockpit.
|04-30-2007 01:57 PM|
|l0keman||lawls. Front, back, same thing.... right? Thanks for the help Capt.stu. It's a good thing I don't do any assembling in my line of work, huh?|
|04-30-2007 01:51 PM|
|capt.stu||that block is on front of the mast and is intended for use with a spinaker halyard.|
|04-30-2007 01:46 PM|
|l0keman||I mean the pully on the back of the mast top in the very bottom picture. it's kinda hidden by the rocks (camos it).|
|04-30-2007 01:38 PM|
The one on the back...
maybe part of a boomvang?
|04-30-2007 01:33 PM|
Hellosailor, thanks for the info.... I was implying my beer spilt. I got the pictures on my lunch break and here they are:
this is to show what hard ware is attached to the boat. I need to get a pully for each side as part of the rigging for the jib. I believe in the photos i've been seeing, the pully is attached to the railing on the boat... is that rigt? I have seen a couple pics with a track there that has an eye for the pully and I have a set in the box of stuff the PO gave me.
more to see harware installed. I have to install the pullies that go starboard and port where the boat comes up on the sides to the roof.
here is one of the mast base (mast foot?) you can see the pullies on it and the cleats:
here's one I found of the mast top..what is the little pullie on the back for?
|This thread has more than 10 replies. Click here to review the whole thread.|