 Quick Menu


Topic Review (Newest First)

08032002 09:16 AM 
Sailormon6 
Hull Speed
Jeff,
The authority that Duane cited said "it all depends on displacement." If we assume that is true, just for the sake of argument, then the one quality that distinguishes a heavy displacement boat from a light displacement boat is that the heavy boat moves more water out of its way than the latter. If the hull has to move more water out of its way, more energy is used up to drive the hull through the water. Perhaps a light displacement boat is capable of pushing its own, smaller, bow wave through the water at a faster speed than a heavy displacement boat can push its bigger bow wave through the water, using the same amount of energy. I don''t know whether this reasoning is correct, but it seems to be consistent with what you and Duane''s authority are both saying.
Also, Duane''s authority says, "Everyone is familiar with Anthony Deane''s original formula for heavy displacement hulls, and people are slow to catch that nonplaning boats go faster than Deane''s formula predicts, despite our observations that boats sometimes do go faster than they''re supposed to." You said, "Waterline''s affect on hull speed is theoretical and not absolute." Is this an indication that, as boat design becomes more sophisticated, the authorities are coming to the conclusion that Deane''s formula should only be taken as an approximation, and that, with future advances in boat design, the upper limits of speed can be raised, and that perhaps Deane''s formula itself should be modified to reflect current technology and thinking? This would certainly explain the huge amount of anecdotal evidence that boats do in fact exceed the speeds predicted by Deane''s formula, without planing.

08022002 06:03 PM 
Jeff_H 
Hull Speed
This is a good discussion but a couple points here.
While some boats with long over hangs increase in speed as the boat heels not all do. In the current thinking, the boats that do increase in speed, do not increase in speed because the waterline is getting longer as previously thought, but because the counter is submerged increasing the buoyance aft and helping prevent the stern from squatting.
Moving crew forward as a boat comes off the top of a wave can help a boat surf sooner. (Similar to walking toward the front of a surfboard.)
I think that it is not just a matter of lower displacements per se but the degree of fineness of the bow and stern. There are boats that are considered semiplaning or semidisplacement hulls. These boats easily achieve speeds well over the theortical 1.34 times the square root of the waterline length. The issue that creates hull speed is about the energy required to push a boat against the resistance of its own combined bow and stern wave. When you talk about semidisplacement hulls great effort is made to reduce the height of the bow and stern wave at speed so that while the boat may not actually climb up on its own combined bow and stern wave (i.e. plane) it takes less energy to overcome the drag of its own combined bow and stern wave. Typically these are boats with comparatively fine bows and waterline beams, comparatively shallow canoe bodies and fairly powerful stern sections. If you look at most IMS typeform boats or the Volvo Ocean race boats that is where they get their speeds well in excess of the theoretical 1.34 number. Almost all catamarrans do not plane but infact get their speed though small wave making (i.e. semiplanning).
Jeff

08022002 12:17 PM 
Sailormon6 
Hull Speed
Thank you all for your very informative responses.
Jeff H., you said: "The waterline length is thought to limit the hull speed because if the boat goes any faster the stern wave has to move further back taking the trough between it and the bow wave along with it. As the trough moves aft, it causes the stern to drop, making the boat sail uphill…[A] boat with extra volume in the stern can exceed its theoretical hull speed because the extra bouyancy prevents the stern from dropping into the trough." That seems to suggest that you should move crew weight forward whenever the boat is nearing hull speed. By doing so, you lift the stern slightly, making the boat ride in the water as if it has more buoyancy in the stern, and deterring the stern from dropping into the trough. Is that correct, or am I missing something?
In the materials submitted by Duane, the author says, "The formulas show that lower displacements permit higher speeds without actually planing." That really puzzles me, because if the speed of a displacement boat is limited by the fact that it can only climb up over its own bow wave when it is planing, then logically it seems that the only way that the boat could go faster without planing is if the bow wave itself moves faster through the water. So, does anyone know if the bow wave of a light displacement boat (which is presumably smaller than the bow wave of a heavy displacement boat of the same length) moves faster through the water than the bow wave of a heavy displacement boat? Or, is there some other explanation that I am missing?

08022002 10:30 AM 
DuaneIsing 
Hull Speed
Greetings, Dean.
I did a quick google search on the topic and the best I could find was the snippet (from http://potteryachters.org/manyways/hullspeed) you''ll find below.
Please keep in mind that I''m not in a position to debate the subject on too technical a level since my fluid mechanics courses were long ago and not of much use here anyway. Since I have not read Gerr''s book, I can''t say what assumptions were used to derive the formula.
Fair winds,
Duane
[start snippet]
But just how fast can a monohull boat be expected to go? It all depends on displacement  more specifically on the D/L ratio (i.e., how heavy the boat is compared to the LWL). Naval architect Dave Gerr worked out the relationship, one of the great accomplishments in modern naval engineering. (David Gerr: Nature of Boats, McGrawHill; Offshore, Dec. 94, pp 2933)
D/L ratio = D[in long tons, 2240 pounds]/(0.01 x LWL)^3.
S/L ratio = 8.26 /(D/L ratio)^0.311
The formulas show that lower displacements permit higher speeds without actually planing. Everyone is familiar with Anthony Deane''s original formula for heavy displacment hulls, and people are slow to catch that nonplaning boats go faster than Deane''s formula predicts, despite our observations that boats sometimes do go faster than they''re supposed to.
[end snippet]

08022002 05:30 AM 
Sailmc 
Hull Speed

08022002 05:29 AM 
dhartdallas 
Hull Speed
If a boat has a waterline length of 25 feet on her feet and you heel that boat such that there is now 27 feet in the water, you still have waterline length. The formula doesn''t specify how you get waterline length, just that you have it. When the boat heels, you change the waterline length. It is now 1.34 times the square root of 27 feet instead of 25 feet. Sail boats heel. The increase in waterline length with heeling is one thing that accounts for some people finding that they get more hull speed underway than they calculate sitting on the dock on the basis of the manufacturers stated designed waterline length. Of course there are factors that cause variation between boats such that the 1.34 may not produce exact hull speed of a given boat. But it is close. The boat is in the trough between the bow and stern waves and is trapped by it unless it can plane, no matter what that wave length is. The only way the D/L could influence hull speed is if you increase the D without increasing the sail area. It is assumed, no matter what the hull form, that you have enough power to reach the theoretical hull speed. Light boats are more easily driven, but they still make waves when the go through the water.

08022002 05:09 AM 
DuaneIsing 
Hull Speed
I don''t have the reference book in front of me, so forgive me if I am wrong here.
I believe that the factor we are discussing (1.34 plus or minus) has been expressed as a function of the displacementlength ratio, although I doubt that this is absolute, either.
I suspect (but can''t prove) that the design parameters found on most boats with low D/L ratios contribute to factors higher than 1.34 and conversely for the designs of the high D/L boats. Of course, SailorMitch''s point about the waterline length change can be significant, as well.

08012002 07:46 PM 
SailorMitch 
Hull Speed
The time honored standard is 1.34 times the square root of the static waterline as a starting point for discussing hull speed. That doesn''t change with the point of sail. But the length of the waterline can change (lengthen) as a boat heels over, so yes, the boat can go faster than the standard 1.34 times it''s static waterline because guess what...........the waterline suddenly got longer!
And yes, some boats can do better than 1.34, and some can''t. My little 27 footer has exceeded it''s theoretical hullspeed for extended periods on several occasions, primarily downwind or reaching. The most recent time it turned out to be 1.7 times the static LWL.
Bottom line  use 1.34 as the starting point, knowing up front that it may be high or low for a particular boat. Let''s don''t make this more difficult than it has to be.

08012002 07:08 PM 
dhartdallas 
Hull Speed
Duh. One assumes a standard hull form for discussion purposes. One assumes the boat isn''t round, square, diamond shaped, etc. Fat, skinny, the parameters shift, but they don''t change. Ocean racers have macrodinghy hulls and surf in the roaring forties. A Tornado will do 1.7 times the windspeed on a broad reach. A ridable bow wave skews it. Trapped! Trapped like a rat! In a wave of its own making!

08012002 06:24 PM 
Jeff_H 
Hull Speed
Oh I am so sorry Dallas,I am afraid that is not the correct answer, Bert, tell him what he would have won!....OK seriously, Dallas has it mostly right. I am quoting here:
"Waterline''s affect on hull speed is theoretical and not absolute. As a hull goes faster, the bow wave stretches to the point where the bow and stern wave become on wave cycle, whose wavelength is equal to the waterline length. This brings us to wave theory. "
"The speed of a wave (in knots) is equal to the square root of the wavelength (in feet) multiplied by 1.34. If your boat has a waterline length of 32 feet, the theoretical hull speed is 7.6 knots. The waterline length is thought to limit the hull speed because if the boat goes any faster the stern waves has to move further back taking the trough between it and the bow wave along with it. As the trough moves aft, it causes the stern to drop, making the boat sail uphill."
"Except for planning designs, sailboats typically can''t generate enough power to go any faster and climb their own bow wave. But a boat with extra volume in the stern can exceed its theoretical hull speed because the extra bouyancy prevents the stern from dropping into the trough. By the same token, a fineended design might not achieve its theoretical hull speed if buoyancy in the stern is insufficient." (Written by Steve Killing and Doug Hunter)
In looking at the more recent data it is not all that unusual to achieve speeds that are 1.5 times the square root of the waterline. It is harder to achieve higher speeds upwind since there are generally less drive upwind than when reaching. My boat generally goes upwind in windspeeds over 10 knots at 1.5 to 1.6 times the square root of her waterline at wnd angles as close a s50 degrees true. Newer more efficient designs will often do better than that.
Jeff
Respectfully,
Jeff

Posting Rules

You may post new threads
You may post replies
You may post attachments
You may edit your posts
HTML code is On



All times are GMT 4. The time now is 08:38 AM.
