|Topic Review (Newest First)|
|03-11-2008 03:33 PM|
|sailingdog||I'd also wonder what kind of marks those boots are going to leave on the deck.|
|03-11-2008 03:14 PM|
"inflatable boots...Government issue". Ah, I think you've made the wrong assumption there. The US military issues "plastic" boots with an "inflation" valve to PARACHUTISTS. But the valve is not for inflation, it is there to allow pressure equalization when the occupant is being flown up to high altitudes--or jumping from the plan and experiencing sudden depressurization, which would make for a rather dramatic change of boot fit.
These are also called "Mickey Mouse" boots, after the big black "boots" seen on Mickey, as opposed to standard leather GI footwear. Been on the surplus market for a long time in black, and Winter White. Dunno how non-skid the Gi Rubber is but that's an interesting idea, they're usually well priced.
|03-11-2008 01:48 AM|
|frankdrebin||I don't know if they would scuff, but I was given a pair of inflatable boots. Rubber and on the heavy side. Mine are black, but I've seen white. They are Government Issue. Toasty warm.|
|01-21-2008 02:55 PM|
Unfortunately I am a size 13 shoe. Getting gear to fit is always a challenge at 6'6" and 225.
I like to have my bibs as the outer layer, right under the jacket so everything up to my chest stays dry when I am not wearing the coat. Staying dry is always the issue out here. If I am dry I am warm.
|01-21-2008 02:04 PM|
I'm also a tele guy but I still fixed heel from time to time. 9.5 is my shoes size and I actually have a brand new, never worn, pair of classic Asolo Snow field leather back country boots if you're interested in those..
I actually have so much crap I had to build a barn to keep it in and I've been trying to find gear that will work across many hobbies but as you know it does not always work out. I always put my bib straps over my first layer then put a vest or prima sweater over the straps? I've never layered my bib straps over a second or third layer..?? Might help with the slipping or if they have an adjustable X strap, on the back, move the buckle a little more North...
|01-21-2008 12:02 PM|
Prima loft sweater - Got one, wear it under my foulies sometimes. Works well except the shoulder straps from my bibs slip on it.
Bibler tents - the fuzz is effectively the inner layer right? It stops drops from forming and dripping on you which would happen if the inside was smooth. Fine tents but too expensive.
Sleeping bags - Gore dryloft. More breathable less waterproof (in their own words). You did go back to a non gore bag!
Climbing without a shell - only in dry weather of course.
Different designs, different jobs - I guess we can agree to disagree. After about 30,000 ocean miles (on the same jacket, two pairs of bibs), I like my foulies a lot. My alpine stuff is pretty alpine specific. Not very waterproof and too lightly built for my boat. (and the hood would collect water). 20 fourteeners and 10 or so ski seasons it is still holding up well. (I telemark too)
Great discussion. Strong opinions on both sides. This is way easier online than arguing in person because the medium gives one time to build good counterpoints.
It is sunny and cool here today. I'll be wearing my down sweater for a walk.
Finally, do you ever have a lot of stuff. When is your next garage sale and what size are you?
|01-21-2008 11:14 AM|
Gore-Tex tents: The reason Gore-Tex tents don't work is because Todd Bibler patented the way to actually execute this not W.L. Gore. It involves a layer of moisture trapping fuzz laminated to the PTFE membrane (Gore-Tex is PTFE) which captures the vapor in the air and holds it to the tent wall and then transfers it to the out side through temp and moisture differential. I own both a Bibler tent and a Bibler bivy sack and they work incredibly well and we have far less condensation than in "double walled" tents. Biblers are expensive, at nearly triple the cost of a comparable double wall tent, so the market is very niche. Single wall tents DO work, and I've used mine all over, and have yet to have serious condensation issue. My Fitzroy is now 12 years old, and has some hard miles on it, but is no worse for the wear and still performs just like it did when I purchased it. The perception by most, that shop at REI, LL Bean or EMS, is that single walled tents must not work because they are not sold or seen at these "price point" shops and this is just not true..
Gore-Tex Sleeping Bags: - A few builders tried traditional Gore-Tex but after 8" of down insulation there was minimal temp differential to get the final "push" through the membrane so the idea was abandoned. W.L. Gore then came up with Gore DryLoft a highly water resistant membrane that has nearly double the breathability of regualr Gore-Tex. My 800 fill down summit jacket's shell is made with Gore DryLoft and it really works well.. While I've owned a DryLoft sleeping bag I switched back to a DWR microfiber shell for weight savings as the added membrane added a few ounces and stuffability was compromised some.
By the way we rarely hike or climb with a shell on. We have a climbing layer that consists of fleece layers only. We don't care if they get wet when we sweating and warm and our shells and insulating layers stay dry in our packs ready for camp. We usually wear this layer while setting up camp and as we stop sweating, but are still plenty warm, this layer gets about 90% dry it is then hung in the tent over night and ready for the next day of hiking/climbng. Only in severe snow, freezing rain or rain do we actually put on our shells when moving..
Bible Fitzroy Single Wall Tent- Tree line Mt. Washington
Bibler Fitzroy - Fuzzy walls (hard to see but it's there)
Different designs different jobs: While marine jackets do have some features alpline jackets don't I have never found these an absolute necessity. I wear my life jacket, with built in harness, and my strobe light with lithium batteries, on the outside of my shell. Don't get me wrong I actually own "marine foulies" but for 90% of my sailing time I find my alpine gear more comfortable and to have a far better functioning hood. I keep both types on my boat and 9 out of 10 times I reach for my alpine jackets and the guests get to wear my marine foulies....
|01-21-2008 10:29 AM|
I think you missed my point regarding skiing and climbing gear. "Sitting in camp at night when the temp drops to 22 BELOW ZERO F" is not skiing or climbing. It is my experience that at that point in the day I am wearing all the clothes I brought and many times I am stuffed inside my sleeping bag drinking hot tea. While that does compare with being a helmsman,the methods of staying warm are completely different. You could hardly steer from inside your sleeping bag with all your clothes on. During the climb up to that camp is when the technical benefits of proper mountain clothing come into play. That is when you are working up a head of steam and are more worried about sweating and getting soaked. I have never worked that hard, for that sustained a period, on any boat.
On the other hand, I have sat at the helm in very cold wet weather, for hours at a time, when good mobility took second place to warmth. Under those conditions the things that make mountain clothing great are in conflict with what makes ocean gear great.
For example, my absolute favourite piece of mountain equipment is my down sweater. It packs down to nothing, weighs a few ounces and is as warm as toast. At the end of the day I slip it on and bask in its warmth. I never take it sailing because it soaks up water like a sponge. On my boat I live in fleece and other bulky things because I have the room to bring them and they are still warm when damp. They also dry very quickly when the chance presents itself.
Your rant about fleece lined collars also doesn't make sense to me. First of all, why make a collar breathable when it is open at the top to the air? Secondly, my Patagonia mountaineering jacket, as well as my Henri Lloyd sailing coat boat have fleece lined collars although with different designs. Finally, I normally wear a fleece underneath both those coats with the collar turned up for even more protection. I like the fleece lining. The salt spray thing...I don't know. What is saltier, sweat or ocean spray?
The Goretex question. As someone else mentioned earlier in this thread, breathable membranes rely on a moisture differential from one side to the other to work. The membrane only allows vapour through, not droplets. So, in order to work, the inside of the garment has to be warmer and more moist than the outside. Then the vapour is carried through the vapour permeable layer. The farther that vapour permeable layer is from the source of the moisture the less efficient it becomes. Once you add layers of insulation underneath (between the creator of the vapour and the membrane) it gets even less efficient. If the moisture condenses inside the membrane it stays there. Therefore, insulating under gortex defeats the breathability. What the goretex then becomes is simply a good waterproof material. Ever wonder why goretex was not successful as a tent fabric? Now you know why. The tent is too far from the source of the vapour and the moisture just condenses on the inside of the tent. Ever read about the challenge of making goretex sleeping bags? It would seem to be a perfect marriage but, as many folks have found out, the bag just keeps getting wetter and wetter from the inside as the moisture you give off overnight condenses in the insulation and won't pass through the outside goretex layer. They are very waterproof though. Goretex is a well marketed gimmck. Forget about breathablity. Think of it as very water proof but the breathablity comes from the design of the garment more than the material. That is why pockets and underarm zippers are important. They make it breathable.
Although mountain clothing will do on a boat, there are things about sailing gear that make it better. My sailing coats are designed so that chest harnesses can be worn under the coat and still be clipped into. They are designed so that my life jacket can be attached to the coat and stays there. It has a nauseating green hood with metalic reflectors so that you can see me (visually and on radar) when I fall off the boat. It has a beavertail to keep my groin warm when I fall in. on the other hand, my climbing jacket has pockets that are accessible while I am wearing a pack. It has pit zips for when I am working hard. It has pockets with thin mesh linings so that when I leave them open they help the coat breathe. It has a snow cuff arounb the waist so that blowig snow doesn't go up the bottom. It has a tunnel hood designed to trap a tube of dead air around my face to keep me warm. In short, the coats are different. They are designed to do a different job.
|01-21-2008 08:25 AM|
Such as a four day February traverse of NH's Presidential range including Mt. Washington. Mt Washington is one of the coldest and deadliest mountains in the US due to it's freak positions at the convergence of multiple weather patterns. Do you think we are "sweating" while sitting in camp at night when the temp drops to 22 BELOW ZERO F with winds racing by at well over 60mph in our "silly" alpine gear? Sorry but I've yet to experience, or sail in, weather even approaching 15 degrees F let alone 22 BELOW ZERO. Your statement makes no sense from a practical point of view. oh I do ski in the rain & freezing rain and snow...
The fabric weight of the outer material the jacket is made of makes virtually no difference in real warmth. It is the air space trapped by "layers" that make the real difference in warmth. The outer "shell" of the jacket is designed to do three things: 1) keep water out, which Gore-Tex does 2) stop wind which Gore-Tex does and 3) to be breathable which Gore-Tex is.
Adding a thicker outer fabric such as in a Musto, Lloyd or Gill off shore rated garment only limits the breathability of the jacket and also restricts movement and agility.
I have owned and do own top line jackets from "marine" foul weather gear makers and alpine makers and find my alpine gear to do everything my offshore stuff does just a lot more comfortably. The hoods for instance are actually usable on alpine gear and are mere afterthoughts, in my opinion, on most, if not all, off shore jackets. The only area where an off shore jacket wins is drip cuffs but I have never had that become a problem even in massive seas and high winds.
Take for instance a fleece lined collar from an off shore jacket. Think about it? What does polyester do? It wicks moisture and creates a "dead air" space for insulating purposes. OK so now we have a large piece of fleece sewn to a waterproof, breathable nylon collar to which any moisture, if the collar is actually designed correctly, which mine was not, should wick through in the form of "vapor" so it can pass thought the breathable membrane of the outer fabric.
So what happens to the salt from the spray on your face or collar? Yes, you guessed it, it sticks to the surface of the fleece, more importantly the side facing your skin, because salt is not "moisture" or convertible to vapor from body heat so it sits there sucking any last bit of moisture out of your skin until your neck gets dry, chapped and irritated. Been there done that, ask me how I know this...
Please be careful with your contradictions as well. You stated "It is material that doesn't get clogged with salt (like goretex does) and dries fairly quickly."
Just for reference the top of the line gear available from Musto & Lloyd, the top two makers of offshore gear, IS GORE TEX! The rest of the garment line ups, for true "off shore" capability outerwear from companies like Gill and West Marine, is made of FAKE, KNOCK OFF or IMITATION water proof breathable Gore-Tex "like" material. Here are just a few of the top line off shore capable jackets:
Musto - MPX Off Shore Jacket
Musto - MPX Off Shore Race Jacket
Henri Lloyd - Gore-Tex Ocean Racer Jacket
Henri Lloyd - Gore-Tex Ocean Racer Jacket
Gill - OC Ocean Racer Jacket OCJ2 - Fake Gore-Tex called 5-Dot
Gore-Tex does not "clog" as so stated, unless ruined by improper washing, but does become less and less breathable with thicker and thicker outer fabrics that need to be "pushed" through.
The "leaking" of Gore-Tex, some people claim to have experienced, comes from the outer fabric "wetting out" from the lack of replenishing the DWR coating & thus severely limiting the breathing of the Gore-Tex and it's ability to push the vapor through a wetted out nylon. This resulting wetness is what you get wet from sweat condensation &NOT because the Gore-Tex let water molecules pass through it's membrane.
To be sure ANY of these garments work as designed they must periodically have the DWR (durable water repellency) re-applied. If your outer shell is "wetting out" it's time to replenish it's water repellent capabilities. I have been using NikWax products on my foul weather gear for years and the stuff still beads water like it did when it was brand new. Always use the NikWax wash first though before applying the TX Direct water repellent coating. NEVER wash Gore-Tex with a detergent and always use an approved cleaning agent such as NikWax - Tech Wash or Ivory Snow powder if you must use a "grocery store" cleaner.
NikWax makes both a spray and a wash in version of their DWR and it's called TX Direct!
P.S. Part of the reason I understand a little about outdoor gear is because I have been involved in the product testing phase (read free gear for about an hour or two's of report writing!). Below is a sampling of some of my jackets. These are some of my alpine climbing jackets...
|01-21-2008 05:21 AM|
I would think the 50% figure comes from a dressed person with a bare head. If we put as many layers on our heads as we put on our bodies in cold weather, the losses would be proportional to area. But even with hats and hoods and goggles, we leave nose and mouth exposed to breath. Breathing must account for a certain proportion of heat loss - cold in, warm out every few seconds.
I still vote for a wheelhouse.
|This thread has more than 10 replies. Click here to review the whole thread.|