|Topic Review (Newest First)|
|02-02-2008 05:17 PM|
Sorry, off line for a while. My mast is not stock to the boat, but thanks for the direction to RigRite. I'll check them out. Marina just had a power outage and I need to shut down. Thanks, again.
|01-24-2008 04:40 PM|
One place to look at various spar sections follows. not all inclusive but start.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
|01-24-2008 10:34 AM|
If the mast is stock to the boat, call the manufacturer. If the mast as retro-fitted, call the spar manufacturer.
|01-23-2008 09:56 PM|
Originally Posted by Shack View Post
|01-23-2008 09:50 PM|
I'm preparing to make a new attachment on my mast, but I'd like a diagram of what's in there before I start drilling holes. Do you guys have any resources (diagrams) out there on mast construction?
I have an in-mast furler. Leading edge of mast in encased and houses halyards running inside up the length of the mast for head sails. Separate compartment to aft (opening to aft for sail and furling rod/hardware.)