|Topic Review (Newest First)|
|02-12-2008 04:47 PM|
Originally Posted by drynoc View Post
|02-12-2008 12:10 PM|
a friend of mine once said...."there are two truly happy days on the life a boat owner, the day that he buys it, and the day that he sells it. The rest of the time is spent working on the boat, and taking it out every now and then."
As everyone has said here, it is a never ending job, for life. BUT OH SO SWEET
|02-12-2008 01:56 AM|
Congratulations on getting her the way you want her. I think I know what you're getting at. You're not trying to make a new forty footer out of her. You probably won't be sailing any more than the rest of us, what with normal maintenance, but at least you have the sense to say, good enough. Have fun.
Larry and Susan,
Thanks for the poem. We all can identify with it. Has anyone published anything on the cathartic effects of working at West Marine? It must be nice to see others on a daily basis and be able to say, "there but for the grace of God, go I". (g)
|02-12-2008 01:40 AM|
|SimonV||I went to West Marine today to get some glue to fix the hole in the floor of my dinghy, only $19.99 less discount being a new boat owner + tax. WRONG..... I left the shop with glue for the dinghy, an inflatable boat repair kit, 3x tubes of Calk, a USA flag, a 360 piece marine electrical terminal kit, elec tape, acitone and a safety tether. Over $200+tax AND I NEED TO GO BACK. There is no such thing as finished, getting started is just as hard because this all started with trying to blow up the dinghy, foot pump would not pump, strip down pump find flapper valve in bits inside pump make new flapper valve using Duct tape and flat washer. Blow up dinghy find hole in floor go to West Marine and on and on it goes. finished never.|
|02-11-2008 10:30 PM|
In all of the annals of nautical history - no boat has ever been 'done' until it is resting on the bottom. And even then, there has often been some poor cockeyed optimist who will try to refloat and resurrect her.
Always remember the rule of three's: Any project attempted on a boat will cost three times as much and take three times as long as the original estimate. It will take three trips to the chandlery and there will be three jobs which necesarily must be done before beginning the original project - each of which has its own rule of three's. Any attempt to incorporate the Rule of Three’s into your estimate will result in an additional tripling of the tripled estimate.
I have a poem you might like:
The Rule of Three’s
By Elliot MacDonald
It’s a perfect day to varnish, First Mate’s not here today.
The sun is warm, the air is clear, teak looks a little gray.
I can freshen up those hand rails in three hours, maybe less.
I’ll have it done in no time; I’ll even clean my mess.
So off I go to West Marine with my list of stuff to get:
Some masking tape, some sandpaper, some varnish and I’m set.
I kind of set a budget; it’s not that big a chore.
I’ll spend less than thirty dollars, or just a little more.
Back at the boat and I decide this job could get done quicker
With my electric sander and a little sip of liquor
I sip my rum while I string out extension cords but then
The electric isn’t working when I try to plug things in.
So I’ll give up on sanding and solve this problem first
I trace the wires and find one loose, I anticipate the worst
But luck is with me, it can be fixed with a crimp-on wire connect.
I plug it in and smoke pours out, must be one more defect.
I quickly throw the breaker off and hope no harm was done.
I sip my rum and contemplate; this boat work’s so much fun.
So then I check the main fuse to the inverter – then I groan.
It’s a fifty dollar item and for sure the damn thing’s blown!
And off I go to West Marine for the second time today.
They all know me by my first name, I am how they earn their pay.
They know I’ll stop and see them sixty times when I’m in port
My visit’s brief, I’m busy, I must go back and find my short.
I find the short and fix it and then replace the fuse.
I plug the sander in, but first, a little sip of booze.
We sailors have to drink, you know, it helps to keep us sane.
It helps us to forget our woe, it helps to numb the pain.
I go to the fridge; ice for my drink will make it nice and cool
But what’s this puddle on the sole, it looks more like a pool.
Oh, ****, the fridge is broken, I’ve got another task
I know where I’ll be going soon, you don’t even have to ask.
I’m back again to see my friends at my local West Marine.
I’m sure that as a customer, I’m the best they’ve ever seen.
This time I need an obscure part for my marine refrigerator
Jim says they always stock that part, they all fail now or later.
I estimated thirty bucks, I’ve now spent ninety eight.
My ice is gone, my rum is warm and back comes my first mate.
She cheerfully unloads her bags and then I hear her sing,
“And what did you get done today?” I answer, “Not a thing!”
|02-11-2008 05:13 PM|
Why cant I look at things the same way as drynoc. I'd wrap rope around the tiller and go geez I need a few more cleats for this, add cleats, think hmmm, maybe a autopilot instead, add wheel auto pilot, go hmm bet hydraulics would work better add hydraulic rams, notice the engine needs more juice to power rams, add new engine, it just goes on and on.
Congrats drynoc send some finished my way.
I did finish one thing on the boat.......that last beer.
|02-11-2008 04:43 PM|
Best of luck with her. Whar river are you on?
|02-11-2008 04:40 PM|
I must have an English problem
(I don't mean to be snotty with that title - tried to change it and can't.) There is still a lot of work to do, but only to systems that are already on the boat and don't need to be improved - just maintained. The VHF must have come with the boat, for example, but it works and there is no need for a better one. All of the winches (ten of them) are original as well, but they all work well and don't need to be upgraded. The rope clutches look a little tired, but again they work as designed. I'll need new sails eventually, but that will be a replacement. Rigging will have to be seen to before too much longer, but again that is replacement, not upgrading something that works.
The difference is that a lot of people look at old style winches, for example, and think that the boat "needs" new self tailing models. Not true. The owner might want those new self tailing models, but the boat does not need them. Same with a chartplotter (I'm on a river with maybe an occasional foray to the Chesapeake Bay), auto helm, and much else. (My auto tiller is a piece of line tied off on both sides of the cockpit. I wrap it around the tiller several times, and then give it minor twists now and then as required. Motored for twenty five hours that way once. It's a little less accurate sailing, but still allows me to lean back and enjoy the sail, or adjust the sails as need be.)
Someone mentioned I might be in the market for a larger boat soon. Not true. I actually gave some thought to down sizing last summer, and decided that I must be an idiot to even consider it - after all of the work I have done on this one. I singlehand nearly all the time, and this boat is the largest I would want for that purpose.
Someone else mentioned racing. Only on the river locally. I don't have the time or the desire to race off shore.
|02-11-2008 03:52 PM|
|timebandit||Now just go out and try to wear everything out!|
|02-11-2008 02:37 PM|
I always finished mine too
The day I sold them......anyway congratulations...and if you ever see me out there come on over and well blow the head off a frosty mug from the fridge...
|This thread has more than 10 replies. Click here to review the whole thread.|