|Topic Review (Newest First)|
|09-20-2009 09:55 AM|
Porthole rubbers first 456
First of all, it is fabricated by Goyot france.
Find a Goyot ditributer and ask for the rubber.
You cab buy it on bigger length so you just cut of what you need.
It is very easy to replace.
To cut out the old rubber which is a round rubber, use a small round spade to cut it fron the bottom.
The use a simple sealent like sikaflex and put very little in the frame.
Then bring in the rubber and make the connection on the highest point. Good luck.
|06-13-2008 09:12 AM|
Beneteau First 456
Originally Posted by jwmoir View Post
|06-01-2008 11:58 PM|
|negrini||I think your ports opennings are Lewmar ones, and rubber seals are now replaced by silicon seals. Try Lewmar directly.|
|06-01-2008 07:21 PM|
|brak||Most of Beneteau hardware is made by Plastimo, and if this is the case - you may be able to order from them directly (they have a UK distributor so its possible to speak English to them). I also had some luck with Beneteau office in US - but it is usually more expensive and takes time.|
|06-01-2008 07:10 PM|
Beneteau first 456 port rubber seal replacement
Hi all. I'm looking for a source(s) to replace the hardened, aging rubber seals on the port opennings on my Beneteau First 456. I haven't had any luck with finding a supplier in North America. On owner had suggested using a round rubber seal replacement which I haven't tried yet.