|Topic Review (Newest First)|
|03-24-2010 05:35 PM|
|L124C||I'm happy to report that Bruno from ARCO Answered my questions and supplied a diagram and disassembly instructions (via email) for a very old Barient 23 winch. He even thinks he might have replacement parts (when I figure out what I need). He couldn't have responded faster or been more helpful!|
|03-02-2009 03:04 PM|
NOt hard when the site is only a week old...
Originally Posted by patrickrea View Post
|03-02-2009 02:48 PM|
|patrickrea||Boy, don't I feel foolish. I better get back to that other site where the oldest post is less than a week.|
|03-02-2009 12:07 PM|
|sailingdog||Umm, guys, you're all replying to a 2003 post.|
|03-02-2009 06:16 AM|
I have used Lewmar pawls and springs on my 36 year old Barlow non-self-tailers (yes, very old school, but they are excellent winches). As for Barient, so for Barlow as far as ARCO is concerned, it seems:
I will repeat here my tip for winch servicing: Go to a dollar store and get a small plastic dishpan or tray, something about a foot square. Real cheapskates can use a big shoebox or a corrugated cardbox box. Scribe a circle the same diameter as the winch base. Put over the winch base before you remove the outer "shell". If pawl springs, bearing or any other parts come loose when you are servicing the winch, the odds are that they will fall into the box/tray and not into the water.
I cut one tray for the biggest winches, and have a couple of taped in "reduction washers" for the smaller ones. Haven't lost a thing in years, and it keeps the coamings grease free.
|03-02-2009 12:14 AM|
|patrickrea||Lewmar also sells pawls and spring kits for Barient winches. Even WM has them on the shelves. On their site look for the Barient Repair Kit #1.|
|03-01-2009 09:30 PM|
That is the correct email address.
In all my dealings with them I have never had a complaint.
Try addressing you email to Attention Allan Hutton
|03-01-2009 09:01 PM|
Full contact details
THE AUSTRALIAN YACHT WINCH (SALES) PTY. LTD.
4 Narang Place
St Marys N.S.W. 2760 Australia
Phone: +61 2 9623 2448
Fax: +61 2 9623 2265
|08-27-2003 05:37 AM|
ARCO Winch Company
I have tried to contact them at that email address but received no response.
|08-26-2003 10:14 AM|
ARCO Winch Company
I found them pretty responsive (although not cheap.) I was able to get new springs and pawls for my 30+ year old Barients. Their site indicates that they have been having problems with their forms. Try sending an email to email@example.com.
|This thread has more than 10 replies. Click here to review the whole thread.|