|Topic Review (Newest First)|
|06-05-2008 08:56 PM|
Originally Posted by Capnblu View Post
|06-05-2008 08:43 PM|
|06-05-2008 08:16 PM|
|teshannon||I found my copy of the Tayana 42 brochure and it says "teak and spruce below deck".|
|06-05-2008 07:59 PM|
Cd, I just went out in the shop, I have Burmese Teak, Honduras Mahogany, Red Oak and American Walnut.
I did the finger nail test ( just to see if I was loosing my mind ) and the Teak and Mahogany and Am Walnut are very close in hardness the red oak being the softest of the bunch
I too have worked with Hardwoods for awhile myself and I going to have to disagree ( most respectfully ) with ya.
|06-05-2008 07:49 PM|
You re correct Poopydeck, had to replace 1" x 4" toerail on my morgan 43 , had to bend it. Believe me teak is anything but soft. Old weathered ,dried up, cheap teak might be a cork impersonator though. Worked with mahogany on my house stairs , flexible stuff but hard also but not Teak Tuff SB50
|06-05-2008 07:46 PM|
|Capnblu||I will get a picture tomorrow|
|06-05-2008 07:34 PM|
Originally Posted by camaraderie View Post
Most everything is teak but the 2" stripping appears to be some other species. It could be some variation of teak though.
|06-05-2008 07:32 PM|
It's not one of those, a bit lighter than the Luan.
|06-05-2008 07:28 PM|
Have a look at Afromosia, it's what Hatteras uses on all of their bulkheads and counters, and call it teak interior.
|06-05-2008 07:21 PM|
Originally Posted by poopdeckpappy View Post
I work with it a lot. You can whittle it with a knife. You can press down hard and leave a fingernail inprint in it when raw. Now, as it ages it gets harder (most woods do). But compared to mahog, it is soft. I am not saying it is as soft as pine, but close. Mahgonny, on the other hand, is at least as tough as oak and maybe tougher.
Just my opinion, PDP.
|This thread has more than 10 replies. Click here to review the whole thread.|