|Topic Review (Newest First)|
|07-24-2008 07:52 PM|
Originally Posted by camaraderie View Post
|07-24-2008 02:59 PM|
My recommendation of the Rocna 15 was based on the Rocna sizing chart for a Pearson 33 that weighs in at 11,000 lbs or so. The Rocna 15 is recommended for a 33' boat up to 16,000 lbs.
|07-24-2008 02:26 PM|
Look up your boat length and displacement on the Rocna sizing chart - take the larger of the two and you should be set. Unlike most sizing charts, there is no need to go up a size from the recommended anchor. My boat (just under 41', just over 22000 lbs) has plenty of anchor with a Rocna 25.
Note that a "tonne" is a metric ton, 1000 kg or about the same as a long ton (2240 lbs).
|07-24-2008 12:48 PM|
Actually they are:
1. Do not anchor in a narrow channel or fairway.
2. Do not anchor at the termination of a Traffic separation scheme.
one is tad-amount to parking in the middle of a narrow road.
And the other is parking in the intersection of two busy streets.
Do you get the picture there??
|07-24-2008 12:27 PM|
I have noticed that the latest Vector charts from NOAA show restricted anchoring areas, but the raster charts don't.
What do we go by? I will try to nail down a sample...
|07-24-2008 11:57 AM|
|camaraderie||In a charted restricted area?|
|07-24-2008 11:41 AM|
|sailingdog||In a channel is one.|
|07-24-2008 10:26 AM|
|Boasun||In the rules they mention two places where you SHOULD NOT anchor. And yet I have found people anchored there. Where are they?|
|07-24-2008 01:13 AM|
The Rocna 20 is probably overkill for your boat. IIRC, the Pearson 33 has a displacement of about 11,000 lbs. The Canadian Sailcraft 36T is about 18,000 lbs. If a Rocna 15 can hold a CS 36T, it shouldn't have any trouble with a Pearson 33.
Honestly, i think the Rocna 20 is probably too big for your boat.
|07-24-2008 12:19 AM|
That makes sense. After all I've seen and read I expect it will be my primary anchor. The 20 sounds right.
|This thread has more than 10 replies. Click here to review the whole thread.|