|Topic Review (Newest First)|
|08-10-2008 11:29 AM|
|windmutt||the problem is when you roll the sail into the mast. If not done properly, it will go in easily but jam when unfurled.|
|02-28-2008 07:11 AM|
|Zanshin||I have no problems on my 43DS as long as I keep adequate pressure on the outhaul when furling back in.|
|02-27-2008 04:42 PM|
no tension on
|02-27-2008 04:38 PM|
When I would try to furl-in my mainsail on my SO36i the lower one foot of the mainsail would catch on the edge of the mast. I told the dealer about this problem and last Thursday the technician really tightened up the mainsail halyard. It was easier to furl in the main after sailing on Saturday. I feel that the halyard is way too tight and leaves a (wavy) wrinkle in the leech all the way up the mast.
On the other hand, I have furled-in the main with on tension on the out-haul. The rolled sail takes up too much space in the mast and causes it to jam in the mast.
The continuing adventures of a new sailor...
|02-27-2008 01:55 PM|
Jeanneau 54DS Mast Furler
Anyone having jamming problems with their mast furler?