|Topic Review (Newest First)|
|09-17-2008 09:43 PM|
I should note that .. the EZ jacks design (Arc aft) is easier to tie off on the mast because all the eyes end up in the same place... Slick.
the arc forward.. while usefull for holding the sail near the mast isn't as "neat"
Is EVERYTHING on a sailboat a tradeoff?????
the moral of the story is.. .your Jacks don't HAVE to be symmetrical...!!!!
TUne tune tune...
|09-17-2008 09:40 PM|
This is arc to bow.
Now.. I have lines long enough to run aft.. I haven't yet.. now I just tie off and stow the jacks on the mast. I have to go forward because I haven't installed all the clutches I need yet...
I'm still tuning this design. It's not perfect. I think I'll get there though.
Another thing I did was to make sure that I used solid red and solid green 1/4 inch lines with padeyes spliced. It looks SOOOoooo Christmasy!! HOW COOL IS THAT!
|09-17-2008 09:34 PM|
One Side is like this.....
This is "Arc to Stern"
|09-17-2008 09:32 PM|
I'm experimenting with something...
My lazy Jacks are NOT symmetrical port to starboard.
On the Starboard side I have an EZjacks Copy and on the port side I have a traditional Lazy Jack.
The difference is hard to explain without a pic..(gimme some time to draw one) but the fundamental difference is how the "arc" travels.
If I'm raising or lowering I'll put the bow just off the wind to one side or another.
For raising, you don't want the top battens to catch so I'll push the leech of the sail to arc forward.
Lowering... I start with pusing the sail to arc to stern and swing the bow to push the sail to arc forward.
Wow.. this makes no sense without a pic... or 2
Gimme a minute...or many minutes...
|09-17-2008 08:15 PM|
Check out EZ Jax E-Z-JAX Systems
Great system, priced right (at the time) and came with four lines along the boom.
|09-17-2008 10:56 AM|
Originally Posted by montenido View Post
|09-17-2008 09:08 AM|
|sander06||Slightly off subject... you mentioned having your sail covers made to handle the lazy-jack. I would suggest that you might consider making the sail covers yourself. It's an absolute cinch and would cost less than $100 in materials. Of course, I enjoy sewing having recovered all of our cushions, made pillows, and constructed canvas covers for most of our teak and other deck hardware. Makes me feel more a part of the boat.|
|09-16-2008 10:57 PM|
Check out "Jiffy Jax" on google. I just installed them on my Cat 30 and I think they are the best thing since sliced bread. They retract so they fit under your sail cover, and they can be ordered (like mine) to be deployed from the cockpit. Once the sail is dropped and strapped, retract the lines and they are out of the way. Comes with great materials and easy to follow instructions.
|09-16-2008 08:16 PM|
[QUOTE=chef2sail;369722]Gary we have a double "V" system, which can be pulled to the mast and clipped there when not in use, thus having them out of the way when raising the sail (making it easier) and also negating the need for a specialized sail cover.
Yours sounds exactly like mine, except there is no shock cord, you adjust the topping lines by a cleat on the mast. Maybe the points on the boom where they are attached are located wrong. That might explain why they don't work well.
|09-16-2008 08:14 PM|
I just modified the boom on my boat to have a better lazy jack system and quick furling system. The modification is pretty simple.
I added four padeyes to each side of the boom. On the 12' boom, I spaced the padeyes 1' in from each end and 2.5' apart. I then ran shock cord through the padeyes on each side. On one side, I added plastic shock cord hooks between each pair of padeyes. To furl the sail, I pull the hook over the boom and attach it to the shock cord on the other side of the boom.
I then attached a line to each pair of the padeyes to make a four-leg lazyjack system that looks like this:
The four legs keep the sail pretty well contained when lowering or reefing the sail. The green line is long enough so that the lazy jacks can be lowered and run forward along the boom and up the mast, keeping them out of the way when raising the main or when sitting at anchor.
The materials I used for this are:
10 Padeyes (two are mounted on the mast just below the second set of spreaders, the other eight are mounted on the boom)
2 Harken micro blocks (attached to the padeyes on the mast)
140' of 5/32" line
6 Stainless steel 1" rings for attaching the lines to each other
20' of 1/4" shock cord
3 nylon shock cord hooks
20 3/16" x 1/4" stainless steel pop rivets
If you drop the lazyjacks forward, the sailcover doesn't even need to be modified. Total cost for the system was less than $200.
|This thread has more than 10 replies. Click here to review the whole thread.|