|Topic Review (Newest First)|
|05-26-2009 01:32 PM|
To Paint or Apply Chemical?
What made you decide to paint instead of going with Marine Penetrol, Interlux of any of the other options? We have a '69 Morgan that is oxidized from and orginally very modly and dirty. We pressure washed her and that helped a lot but I'd like to get the shine back on her - and some protection. Right now she looks chalky though very white. I'm not intersted in changing her color. I just want to improve her appearence and improve the gelcoats ability to fight off mold.
Originally Posted by Banshi View Post
|10-19-2008 12:10 PM|
more on KiwiGrip
I recently posted to Buying A Boat forum with details on the Kiwi Grip product:
The post includes a link to a photo site with a deck completely done with this product. Take a look.
|10-19-2008 11:33 AM|
Originally Posted by Faster View Post
You're right Faster. Sand blasting can be harsh if you aren't smart about it. I’m speaking from my own experience only. You can use as low or high a pressure as you want. I had deep molded in nonskid and when using 40psi and fine playground sand (3 bucks a 40lb bag) I had an incredibly clean paint removal with no harm to the original 40 year old finish underneath. It was also so fast and easy a cave man could do it.
Soda blasting is very popular lately. If I ever do it again I'll probably go that route. The key is to use the finest media you can find. I sifted my playground sand for the occasional larger pebble. I bought a can of glass bead (so fine it feels cool when you stick your fingers into it) for cleaning old metal parts, spark plugs etc. The blaster is a fun little toy . . . and a back saver.
Forgot to add . . . . . . . the sandblasted nonskid was the perfect prep for paint.
|10-18-2008 09:10 AM|
|easygoing||I've the same problem. I was told to use cool seal compound like used on a roof of a house trailer. I will let you know if it works and what it looks like.LOL|
|10-17-2008 01:23 PM|
One of our neighbors in the boatyard had to recore his entire deck. When done, he put treadmaster down as non-skid. It's a little pricey, but glued down easy and looked great. He used a color similar to the pain Banshi used.
|10-17-2008 10:22 AM|
|sailingdog||I think pressure washing is far safer than any type of material blasting.|
|10-16-2008 05:56 PM|
Originally Posted by SiXeVeN View Post
If you use a "sandblaster" I'd practice at a distance and see how effective it is and whether or not you actually remove material, rather than just dirt and grime.
|10-16-2008 05:30 PM|
|maccauley123||I am taking a similar approach to heinzir. He is using Durabak which I looked at but decided to go with Kiwi Grip. I have heard great reviews and hoping for good results. Good cleaning, lots of taping and then just put it down.|
|10-16-2008 05:21 PM|
Sandblasting... hmmm. That might actually work. Messy but would get into all those little pits and get them scrubbed out. I could then powerwash out the grit and prime/paint. I'll have to look into that.
BTW, I called a local boat painter and he said he would have to sand flat the molded in non-skid and then paint it with Interdex. Also said it would be major $$$ (of course )
I liked this molded in nonskid when the boat was new but now it is a huge PITA!!!
|10-16-2008 04:28 PM|
|email@example.com||On my thirty year old boat, I use a household product available in most grocery stores tilex mildew remover, in a spray bottle I do 3 steps . 1 pressure wash the decks well, and let completely dry.2spray one area with tilex , scrub nonskid with a stiff deck brush leave till almost dry then pressure wash off. works for me Ole|
|This thread has more than 10 replies. Click here to review the whole thread.|