|Topic Review (Newest First)|
|10-17-2008 01:35 PM|
|KasbeKZ||thanks for all those links. the breaker board mentioned looks just like what i'm looking for. all those other links look quite helpful too! thanks a lot|
|10-17-2008 11:14 AM|
|sailingdog||Thanks for the two links MS.|
|10-17-2008 09:00 AM|
All good avice!
You've received good advice thus far. Here are a few more things to consider.
A great wire gauge calculator: Wire Gauge Calc (LINK)
Marine Wire Termination/Crimping (LINK)
Use tinned marine wire! There are MORE than one manufacturer. I use Berkshire wire but Cobra and Ancor also make good tinned wire.
Use heat shrink crimp connectors. They are more expensive up front but well worth it. The best prices I have seen on small quantities can be found at Sailors Solutions. I worked with Nick to get him using & selling this very high quality crimp for MUCH less than Ancor!!:
Sailors Solutions Crimp Terminals (LINK)
Sailors Solutions also has the BEST price on the proper tool for crimping heat shring connectors!!
Single Ratchet Heat Shrink Crimper $39.95 (LINK)
I have NO vested interest in Sailors Solutions and am a CUSTOMER, who pays full price, just like you guys. I only worked with Nick because no other company / vendor was willing to listen and they all want to sell the "GRAB YOUR ANKLES" stuff made by Ancor which is very pricey & inconsistent especially with their crimp connector sources!!!
I have a distributor up here who sells the same crimps as Sailors Solutions but the smallest quantity is bags of 100..
|10-17-2008 08:36 AM|
Originally Posted by KasbeKZ View Post
SWITCH PANEL 6 GANG ALUM AC/DC BREAKERS 12V 40A 142770
|10-16-2008 03:34 PM|
|KasbeKZ||yeah. are those panels expensive?|
|10-16-2008 03:31 PM|
|sailingdog||If the appliances are in good shape, no real need to replace them IMHO. I'd highly recommend getting new circuit breakers and panels though, since the old ones may or may not be marinized and may or may not be about to fail. It'd be a shame to have a new wiring project burned up by an old panel.|
|10-16-2008 02:51 PM|
thanks a lot for all the advise. i guess i am planning on re-doing the wiring then. will i need to replace a lot of appliances? or just the wires going to them?
i'm pretty good with labeling and all. i've done a top end rebuild on my 1990 300zx and got PLENTY of practice lol.
|10-16-2008 02:22 PM|
|sailingdog||BTW, do try and avoid using BLACK for AC hot and DC ground...use YELLOW for the DC Ground... makes your life a lot easier and may save it.|
|10-16-2008 02:16 PM|
From my own experience rewiring a boat:
Do the AC wiring first because:
(1) You generally want to keep the AC wires away from the DC wires to avoid introducing 60 Hertz hum in DC devices. That means you can often replace AC wiring without disturbing the DC wiring.
(2) When the AC is done, you'll have convenient power that you'll need for the DC rewire: namely good lighting and a heat gun.
(3) Bad AC wiring can be far more dangerous that bad DC wiring. A corroded wire nut can easily create a fire. (Wire nuts should never be used on a boat.) And AC voltages can easily kill a person.
(4) AC wiring is generally simpler than DC wiring. There's less of it and the wires are smaller and more manageable. You'll have an opportunity to test your abilities before the much larger DC rewire project.
All that having been said, be sure to think through your AC needs before you get started. And read up on marine wiring standards. Marine AC is very different from home AC.
|10-16-2008 02:02 PM|
|rayncyn51||My new-to-me 79 Catalina 30 is getting a complete re-wire. Original wiring diagrams are available from Catalina, then add your updates from there.|
|This thread has more than 10 replies. Click here to review the whole thread.|