|Topic Review (Newest First)|
|11-11-2008 11:13 PM|
I found white VC-17 for E39.99 on the internet. You just cant buy it here. Just looking, the good go-fast paint in the US does not come in white. I have found negative comments on the Vivid and the E-paint both. What I have not heard is how the white VC epoxy works in fresh water. I have heard it is not so easy to apply, but does make a good hard finish that will last. However it is not anitifouling paint, it is made for dry sailing. Maybe just have to stick with the VC-17 bronze. Oh well........ Thanks for all the feedback!!
|11-11-2008 10:01 PM|
I have an email into Jotun US. I'm wondering how much more the teflon paint is than regular bottom paint, and if it lasts longer and therefore still cost effective.
I'll post the results when I get them.
|11-11-2008 09:40 PM|
If the Foss Foam rudders are made of epoxy-resin, requiring the rudder being painted white makes sense. Epoxy has a fairly low thermal distortion temperature, and if painted a dark color and exposed to sunlight, can heat up to the point where they will start to deform.
Originally Posted by xort View Post
|11-11-2008 09:31 PM|
|xort||After reading a rudder thread here, I checked with Foss Foam and they insist that any boat out of the water, with dark bottom paint, cover the rudder. They suggest white bottom paint. I didn't think to ask them what white bottom paint.|
|11-11-2008 09:10 PM|
No idea... AFAIK, it isn't available in the USA... so that'd be the first downside to it. IIRC, it is made by JOTUN.
|11-11-2008 09:06 PM|
Thanks Dog. Is there a downside to it? (hard to apply? expensive? both maybe?)
(((And will it let me hit 15 knots like Giu?)))
|11-11-2008 08:17 PM|
As I said above, its a teflon-based paint... doesn't have a biocide in it AFAIK. It is designed to be too slippery for marine life to grab a good hold of.
|11-11-2008 07:24 PM|
Giu has spoiled us with these pictures. Now I want a white hull too.
Seriously, that's not ablative paint is it? It doesn't have the usual chalkiness and dullness.
|11-11-2008 06:44 PM|
|paulk||We've used Micron CXC in shark white. It's an ablative paint and has worked well for us. The lighter color makes it easier to see growth and clean it off, if there is any. It's obvious that Giu has his bottom and keel painted this color for that reason. When he goes out "kelping" he needs to be able to see when to harvest his catch and bring it aboard. It seems that the Portuguese farmers value the kelp as fertilizer for their grapes. It allows them to label their Port "v.s.o.p.":"Valuable Sort Of Phertilizer" and brings them a higher price.|
|11-10-2008 11:25 PM|
My bad, I thought VC Offshore came in white. I must have been confusing it with the VC Epoxy, which as you said doesn't antifoul at all. I used Micron CSC in "Shark White" on my old boat. Good paint, stays clean, easy to apply, but it's very soft and not smooth. I've been thinking of trying Vivid on the new boat.
Originally Posted by j34035 View Post
|This thread has more than 10 replies. Click here to review the whole thread.|