|Topic Review (Newest First)|
|12-17-2008 08:30 AM|
I have the Jabsco on my boat also. I have it in service for 9 years and no problems. But on my boat every one pumps 15 times after use to make sure everything is moved out and flushed with water. Also, a splash of mineral oil every few days goes a long way to keep everything work smoothly. Maybe I have just been lucky.
Tim if you see this also see jokes of the day.
|12-17-2008 08:09 AM|
Series 29 Manual Toilet Pump
Here ya go.
|12-17-2008 06:49 AM|
Originally Posted by sailortjk1 View Post
|12-17-2008 05:04 AM|
|floatsome||They all need regular attention, it seems. I tear down and clean out the pump assembly every spring. In spite of that I find myself replacing the toilet every 3-4 years because something breaks, the parts kit is so expensive and people like a new-looking toilet. I got 2 extra years out of a Jabsco once when the pump housing cracked and leaked when I was rebolting it after clearning out a small toy. I sealed it with epoxy. Interesting comment about the silicone grease on the joker valve. I had been using vaseline.|
|12-17-2008 02:01 AM|
Absolutely. The Twist n Lock is simply referring to the pump which can be closed by twisting the handle. I have rebuilt my two heads and replaced pumps (just before the TnL came out...6 months ago) and it's not much of a deal. Though it can be a touch messy as many will agree.
You can get the retrofit kit, bang it in in a matter of 30 minutes and remember to cover the joker and valve under the pump in silicone grease. I don't think the TnL will protect the joker valve though - the risk to the joker is that it inverts in the pipe when the flow is not right and you then get the nasty stuff flowing back.
Being based in the tropics I have learned from older salts that the joker valve lasts longer if protected by silicone grease. Expensive, but apparently one should avoid petroleum products as it will, over time, harden the rubber.
I keep a couple spare joker valves onboard, just in case.
|12-16-2008 11:02 PM|
|saurav16||and the twist n lock solves the issue with the joker valve?|
|12-16-2008 08:54 PM|
|sailortjk1||Steve, Like I said in my first post here, the new Twist-n-locks are a direct retrofit for (I believe) all existing Jabsco's. I did ours last season.|
|12-16-2008 08:01 PM|
|SteveInMD||Maybe I'll give Jabsco another try with the new twist-n-lock system. It would be easiest if I could just switch out to the new style pump though. Has anyone seen the twist-n-lock pump to retrofit a head (which are only a year and half old)?|
|12-16-2008 07:50 PM|
|saurav16||My existing head is a cheapo jabsco that has to be at least 10 years old the previous owner never used it. The pump is really hard to move and water leakes out of the freshwater hose that supplies the pump.|
|12-16-2008 07:39 PM|
you didn't say what your existing head is...
|This thread has more than 10 replies. Click here to review the whole thread.|