|Topic Review (Newest First)|
|01-12-2009 11:02 PM|
We've used Corian, Surrell, and Avonite on boats. Surrell is what I have the most experience with personally. If you use their adhesive, you can make invisible joints and attach fiddles and backsplashes easily and strongly. You can also join smaller pieces to get the size and shape you want, but be sure to use a plywood substrate as Sailormann mentioned. Personally, I loathe Avonite (I've only used it once though): it doesn't finish well and cracks easily. The Corian brand is the like the 'Kleenex' of countertop materials.
Oh, and he's bang-on about Starboard too. It's good for fish tables in the cockpit, making up equipment panels for the engine room and it makes great drawer slides. It does hold screws as long as you predrill them, but the threads don't have enough bite to sink a countersunk head without stripping. Apparently they make an adhesive for it but I've never tried it.
|01-12-2009 10:13 PM|
Someone mentioned Starboard. This is NOT a good countertop material. This is a thick piece of harder than normal polyethylene - nothing more, nothing less. It melts, does not hold screws, scratches like crazy and is just nasty stuff all around. It has some legitimate uses but they tend to be found on powerboats.
Corian is good. It is more expensive than laminate but for the amount that you are lokking for the cost will be negligible. Look on Craig's List for someone who is remodelling their kitchen, or go to Home Depot and buy the display counters when they are changing their kitchen layouts.
We have 20 year old Corian on our boat (on a plywood substrate). The countertop has an aluminum edging which works nicely as a fiddle. Here is a pic prior to some recent upgrades...
|01-12-2009 01:38 PM|
Originally Posted by sander06 View Post
|01-12-2009 01:12 PM|
Originally Posted by sailingdog View Post
Er, well you are right, of course, as always SD.
|01-12-2009 11:53 AM|
You all are wonderful! Thanks so much! I forgot to mention that we have the original teak edging on the counters. I'll have to get my husband, the woodworker, to create one piece for me to go over the opening where the original Princess stove would have slid in, but that's not a big deal. I think we may well go with Formica over marine ply.
I guess I'll have to revisit the stove issue. We currently have no dedicated ventilated locker for propane storage - the gas tanks for the outboard motor sit in the stern locker, which would have been my first choice.
Fortunately, we're at the planning/dreaming stage of the galley refit. We're still recovering from the initial purchase and what we had to invest to make her safely sailable. ;-)
1977 Catalina 27
|01-12-2009 09:36 AM|
I think you're a bit confused... I haven't worked with Corian much at all... The last kitchen I did work on had granite counters.
I'm not a big fan of using starboard for things, and think that a marine plywood with formica laminate would probably be the way to go.
|01-12-2009 09:10 AM|
Originally Posted by DaleDoll View Post
I guess the answer here depends on what kind of surface you want, what your budget will stand and the skills/tools available to you. If plain white is OK then I would certainly consider the West Marine synthetic lumber. It is easy to work with and you can edge it with teak/mahogany or whatever to create a fiddle rail. If you want some variety in the choice of surface design, then formica/plywood fits the bill. I'm not sure how these two options would compare in price.
I am very attracted by the corian option, but my experience of using it in a domestic kitchen suggests that it ain't that easy to work. SailingDog says otherwise, though, and he obviously has more experience......
Good luck and have fun
|01-12-2009 08:30 AM|
|WinterRiver||Very nice work, Sander.|
|01-12-2009 04:55 AM|
Got any pix of your galley? We have a little Liberty 28 cutter with a galley that I refurbished. The biggest item was the Force 10 propane stove top burner...
Picasa Web Albums - Voyager - Boat Decor
|01-12-2009 12:17 AM|
We're going with Corian, it's easy to work with ( think wood ) cuts, routers like hardwoods and edging can either be in Corian or teak or even Corian with teak inlays.
We, look at a Tayana 55 several years ago that had ceramic which was really nice and grouting was with a caulking, I wouldn't be too concerned with CT tops, also 1/4 hardibacker is pretty lightweight
All our tops, tables and even the nav desk is formica right now and though formica has a lot of choices, Corian is just easier for me to work with.
Plus we want the polished granite look
|This thread has more than 10 replies. Click here to review the whole thread.|