|Topic Review (Newest First)|
|04-25-2009 12:53 PM|
You certainly don't want chafe where the line contacts the link. That's why it's important to do a nice tight whipping there. That will make sure that there is no movement.
I think that by separating the three strands and laying them along side each other where they pass through the link is the best way to go in as much as you have more contact between the line and the link. Passing the entire line through the link in the same direction before starting the splice seems to me would be more difficult and bulky. But I haven't tried it.
I have heard of people applying chafe protection the each of the three unlaid strands, but If you whip the splice tightly at that point to prevent movement you really won't have a problem with chafe.
Here's a photo of a splice that I did years ago and the real problem was the rusting of the link. I suppose that because the line doesn't really ever get the salt rinsed out of it and it lives in a damp chain locker really promotes that kind of corrosion. I soaked bee's wax into the line where it passes through the link in the new splice. I will know in a few years if it helps or not.
But you can clearly see that chafe between the link and the line was really not a problem.
The line was severely chafed in a number of places, but that was on the outside where it rubbed on the bottom and the bottom of the boat.
|04-25-2009 12:20 PM|
|04-25-2009 12:00 PM|
Well, better late than never I guess.
This rope to chain splice was made using what I feel is a really crappy line.
I still think that New England make the best three strand.
Because of how loose and soft this line is, I felt that I should cross stitch as well as whip. The second video is just needle work. (and some nice music)
I hope these may be of some value.
|02-24-2009 09:35 AM|
|sailingdog||There are two commonly used versions of a rope-to-chain splice. One looks like a backsplice and is only connected at the end link. The other looks like a long splice and requires a fair number of seizings for its strength and continues forward along the chain.|
|02-24-2009 12:13 AM|
Just looking for one that will go through my GD windlass!
|02-23-2009 11:34 PM|
Originally Posted by T37SOLARE View Post
I hope you're talking about the rope chain splice that I'm thinking of. I believe that there are several versions.
|02-23-2009 10:27 PM|
The videos are great, any chance of you doing a tapered chain to rope splice version. (Yea easy, I know, but mine keep coming out looking like something that grew out of the black lagoon)
|02-23-2009 10:07 PM|
|knothead||I'm really glad that you found the video useful.|
|02-23-2009 08:51 PM|
I sit here surrounded by shreds of double braid cuttings, marker caps, masking tape, and line but holding a reasonable looking eye splice, thanks to Knothead's video. I couldn't have done it with just the printed Samson instructions--I needed to see someone competently and calmly doing this thing that I kept screwing up.
I wish I had video of my 4 or 5 pathetic attempts leading up to the final product. It would be my gift to the community, helping others attempting this to relax knowing that there was someone out there much clumsier, much stupider than they could ever be. But I was inventive in my failures: Doh! Forgot to put the line through the shackle bail before closing the loop! Cut! How did that core come out there? Cut. What's this extra loop? Cut. Ah perfect...if only I had put the line through the shackle bail instead of the shackle. Cut. (I really did do that!)
And I think I still have enough line left on it for it to be my halyard
Thanks again Knot!