I'm planning on mounting it in the Stbd. cockpit locker and inverted puts the alternate mounting leg/flange up. by installing a 6" x 6" flat I would shield the rubber and maybe have a flat spot to store something strapped down, say spare wood plugs.
03-24-2009 02:13 PM
I would think it would be fine....had a look at mine (un-installed) and it doesn’t seem like there’s any reason not to invert it.
03-24-2009 01:59 PM
Only one concern comes immediately to mind... if you have to work on it, it will spill stuff on you as you open it up.
03-24-2009 01:20 PM
Inverted bulkhead mounted whale pump
I'm preparing the permanent installation of a Titan by Whale MFg. bulkhead diaphram pump. While disassembly allows flow in either direction by reversal. I would like to mount inverted using the bulkhead mounts and have the base mounts on top. This protects the rubber diaphram bellows and gives me a flange to mount a storage shelf.
Any concerns from inverted installation? I just can't think of any....