|Topic Review (Newest First)|
|04-27-2009 01:23 PM|
Ok, now I have another problem with my plan and need some advice.
I was at the boat on sunday and looking at my stancheons to figure out how to run the line. Well, between the two midship stancheons is right where all my shrouds attach. Right to the toe rail area on the edge of the boat.
I still want to run the line outside, but now it seems like I have to put something to bump the line outwards further on these two stancheons to miss going straight through the shrouds.
|04-26-2009 11:05 PM|
|04-25-2009 05:32 PM|
Ok, now I understand.
|04-25-2009 05:23 PM|
Did you read the linked thread where I discussed the various options available and explained why I swapped out our old Schaeffer leads, i.e. because they were "ankle biters"? I think the photo immediately above (from my boat) clearly demonstrates the problem.
I was referring to the old style more so than the newer outboard "Clear Step" version by Schaeffer (i.e. the ones that "encircle the stanchion"). But I still think the Harken OSLBAs have an advantage in that they really do not protrude inboard of the stanchions, minimizing the possibility of clipping ankles.
|04-25-2009 05:10 PM|
No, I'm talking about the ones that look like this:
IMHO, they're ankle biters since if you walk too close to the stanchion base, they'll clip you right at the ankles pretty hard.
|04-25-2009 04:57 PM|
SD, why do you say the schaefer ones are ankle biters?
Are you talking about the ones that encircle the stancheon?
I also heard that the gerhauer design used to be like the scheafer design with one sheeve. Now it's like the harken with two. Can anyone confirm this?
|04-23-2009 08:31 PM|
Of course, the block that had the separation problem was a stanchion mount turning block, which has a lot more force on it than does this design, since this design lets the line help hold the block in place.
Originally Posted by JohnRPollard View Post
|04-23-2009 08:06 PM|
In my other thread SD cautioned about over tightening, and I mentioned that it had not been an issue. But I can see how it could be if you torqued them.
Don't use the long arm of the allen key. Just snug them with the short arm.
|04-23-2009 07:59 PM|
Ours like Patricks are on the port toerail. The are out of the way and pull in furling line on puts no pressure on the stantions that way.
|04-23-2009 07:47 PM|
The one pictured is a pretty good design...and fairly new... the Schaefer ones are ankle biters... and not using them will make you much happier and leave you needing fewer bandages...
|This thread has more than 10 replies. Click here to review the whole thread.|