|Topic Review (Newest First)|
|04-25-2009 11:45 AM|
Originally Posted by jarcher View Post
The innerspring mattress on our bed at home was in pretty bad shape. We woke up with backaches every morning. We couldn't afford a new mattress at the time so I bought a 4" memory foam topper on Ebay. It made a world of difference. We both loved it. The innerspring mattress eventually got even worse, sagging so much that no topper or boards under it could help. So we bought a new mattress. Now we have this king size memory foam topper that I thought I would cut up and use to replace the 30+ year old foam on the boat. Besides the weight, what other factors would argue against doing this? BTW, the boat is a lightweight trailer-sailer used mainly for daysailing 3 times a week with only an occaisional overnight. As an unemployed victim of the recession I can't justify the expense of replacing the cushions but as long as I have this available . . . ?
|04-25-2009 02:40 AM|
Originally Posted by heinzir View Post
I plan to ask him about the cost of that and I'll let everyone know what the difference is. BTW, in case anyone is interested, here is his web site:
Custom Cushions & Canvas Products in Maine
|04-25-2009 01:43 AM|
|heinzir||Has anyone used "memory foam" (Tempurpedic?) for cabin cushions? One strike against it is that it is very heavy. I don't know what its water absorption or breatheability characteristics are. On the plus side, it can be very comfortable. You can buy mattress toppers relatively cheaply on Ebay. Thoughts?|
|04-24-2009 05:14 PM|
Great tips Nereusailor and Saildog. I took notes. We do have acess to a large freezer. I will try that.
|04-24-2009 01:12 PM|
Originally Posted by nereussailor View Post
|04-24-2009 01:01 PM|
|rayncyn51||This is another project that we are in the middle of. We are using a high quality high density, high compression open cell foam. Check out Foam 101 on newjsi dot com. OC is far more comfortable than CC, and the drain through stuff is way too expensive for the cabin. For covers we are using sunbrella on top, and a breathable poly-vinyl on the bottom. The bottoms will be resistant to absorbing condensation from the fiberglass, and the tops are breathable to facilitate drying. We are also putting zippers on everything to allow for removing covers for washing, or for drying out the foam, should it get seriously wet.|
|04-24-2009 12:33 PM|
Originally Posted by nereussailor View Post
|04-24-2009 09:34 AM|
Cutting is actually easy. here's a couple of tips an upholsterer taught me.
If you don't have any old cushions, make patterns from cardboard or heavy brown packaging paper.
Cut the foam 1/2" bigger on each side than you want the cushions. Example= If your cushions to be 24" by 76" cut the foam 25" by 77" then sew the fabric to the dimensions of the patterns. It squishes the foam down a bit and makes for a tighter fitting cover.
To cut the foam, use an electric knife like you would use to carve a ham.
This makes cutting the foam real easy. Mark both sides, and go slow .
I have done cushions for my last two boats, and am getting ready to do the ones for my latest boat.
Patterned fabric hides a lot of stains. On boats, things get spilled when it gets rough. The patterns in a fabric can hide those stains. Use a fabric that has stain resistance in it when you buy it, or use a spray stain resister such as Scotch Guard. It's not as good as the fabric that comes with stain blocker in it from the factory, but it helps a lot.
On my last boat, I did all of my cushions for around $500 including foam.
I also made my own winch covers, sail bag, sail cover and cockpit cushions.
If you've never done any sewing projects for your boat, I wouldn't suggest starting with cushions, but go for the simpler things like pillows, winch covers, and other small things to get practice. There are plenty of books and videos out there to learn from.
I know that you're going to have someone else make them, but thought others could use the information.
|04-24-2009 03:15 AM|
My wife will be redoing our cushions with our sailrite machine an new open cell foam. We are looking at using material composed of cotton (75%) and polyester fabric (25%) from a fabric store upholstery bolts where there are many to chose from. Then we will scotch gaurd and make them water resistant. We want breathability so we do not get mildew. The cloth is much cheaper when bought this way and there are many more patterns and styles to choose from. It is also more compfortble to sleep on the sumbrella.
The hard part is also cutting the foam to make the odd shappped cushions.
|04-24-2009 02:29 AM|
Originally Posted by blt2ski View Post
Other than that, there really are no other spaces where breaking the cushions into more than one would help. But actually, its worth thinking about, just to make getting the cushions on and off the boat easier, should I want to, say for winter storage.
Thanks for the suggestion!
|This thread has more than 10 replies. Click here to review the whole thread.|