I'm in the same situation: I have an Albin 7.9, with roller furling installed right at the point of the bow. There's no room underneath, and very little to either side (a little more than enough to run the chain through). I've though about fastening a wooden platform to the foredeck, installing bollards to control the movement of the chain and rode, and mounting a conventional roller, but wood rots, and there's little surface area to fasten the platform to. An alternative is to have one built out of stainless. Yet another is to mount one to one side or the other, but aft of the furler, which would mean having the anchor stick out some distance to the side - that doesn't seem very safe. I wouldn't mind seeing some other ways of dealing with this.
05-31-2009 09:38 AM
My boat has a fairly narrow foredeck and roller furling...and I was able to put a bow roller in that has worked quite well for the last three seasons.
05-31-2009 04:57 AM
What did you have in mind, what is your ideal outcome, and what are you willing to do in the way of making changes?