|Topic Review (Newest First)|
|06-04-2009 03:33 PM|
Always check yur lug nuts before towing.
I have had the lug nuts come loose on the side that a power boat was parked when I left the trailer after launching.
Good thing I always get out the star wrench before towing.
Tire pressure should also be checked often. A tire should never run hot. Pull over and check tires and boat after a few miles of high speed towing.
|06-04-2009 01:07 PM|
Originally Posted by timebandit View Post
HS, yes, only 1 tire was replaced which was also a no-no. I also agree with you that the passenger tire was only 1 of several potential contributing factors to the trailer accident I described. I know that my friend had become a bit cavalier about trailering his boat and was just being cheap when it came to replacing the tire(s). This incident was a wake up call for him and he realized that we really dodged a bullet since the rogue tire did not jump into the oncoming lanes of highway traffic which could have been fatal for another driver.
I also learned a lot of trailering lessons from this incident - the first is never let your guard down or assume that everything will work as designed or intended. A standard checklist of things to check BEFORE leaving your driveway with a trailer would probably cover the rest.
|06-04-2009 12:23 PM|
|NCC320||Radial vs. Bias Ply: As I said in my previous post, I have both. I believe the bias ply tires give a steadier towing situation. The radial trailer tires give a softer ride to the trailer (accommodating bumps better), but this same flexing movement is adverse to good trailer handling (in my opinion) since sideways movement of the trailer in a curve or emergency situation is not good..the movement can impart twisting motion to the tow vehicle, which could help break the tow vehicle's traction in marginal conditions. That said, I don't anticipate taking the trailer radials off the motor boat trailer.|
|06-04-2009 11:48 AM|
"purchased a passenger car tire to replace a flat"
One tire only? If you don't replace both sides of the axle at the same time, there will be problems regardless of the tire types. Then, since it was a newly mounted tire, there's no way to know if the rim was damaged, the mounting was improper (tire cord torn during mounting), the air pressure wrong, the torque on the lug nuts wrong....
So at least five things may have been wrong enough to cause that failure. Can't say that the sixth (passenger tire) alone was the problem.
Michelin and Goodyear make radial trailer tires, in some sizes at least they only make radial trailer tires. If I had to choose between no-name Chinese bias play trailer tires, and top brand reliable trailer tires that happened to be radial...I'd trust the top brands. And yes, find the extra dollars to pay for them, one way or another. I'd rather take a Nantucket Sleigh Ride than ride on Chinese tires.
|06-04-2009 11:37 AM|
Single axle---trailer tires
Dual axle ---raidal tires as long as they meet the load requirements.
Run either tire within 2 psi or higher than their rated max load rating cold.
|06-04-2009 11:32 AM|
Originally Posted by DBlair8809 View Post
Those are the only advantages of the radial for trailers I know of, there are others that apply to vehicles, but they don't all apply to trailer use. on vehicles they have the same advantages, plus they'll provide a smoother ride all around and generally provide better traction.
In my opinion, stiffening the sidewall for trailer use reduces the advantages of using the radial in the first place.
|06-04-2009 11:30 AM|
You didn't get him to pull over to see what the problem was
Originally Posted by CalebD View Post
|06-04-2009 08:58 AM|
Originally Posted by DBlair8809 View Post
The Radial ply allows the sidewalls to flex on corners keeping the Tread more level on the pavement for better traction. That benefit for steered vehicles has been clear for many years.
The problem is for a Trailer is that same side wall flexing - That Radials Do So Well - does nothing but bad things when your trailer starts whipping around. Tread Traction is of relatively little importance for your trailer because by the time things are so bad that you are "breaking traction" with your trailer tires your trailer has probably already flipped or whipped you off the road.
If they have now made Radials with stiffer sidewalls to basically defeat the purpose of the Radial ply for twice the price - fine buy them if you wish.
|06-03-2009 10:48 PM|
|DBlair8809||I keep hearing people mentioning trailer tires of the radial and bias variety. What are the benefits and drawbacks to either type?|
|06-03-2009 05:02 PM|
|NCC320||I went through this a little over a year ago...had to buy a pair each for our C22 and our motor boat. Trailer tires are different from passenger car tires....they are made for infrequent use/long storage times and heavy loading (check the load ratings of trailer tires vs. passenger tires), with stiffer sidewalls to reduce side sway. Trailer tires are made in both radial and bias ply constructions, but both are different from passenger tires of either type. They are a little more expensive than low end passenger tires. The brands will likely (with exeception of Goodyear) be brands you have not heard of before, and only a few companies make them. In my search for brands (plus experience on motor boat trailer), I purchased Tow Master (bias ply) from Cabela's by mail....replaced both the tire and the wheels on C22 trailer as the old wheels showed a bit of rust. Used MAXXIS radials on the motor boat, since I could not find the Tow Master's unmounted. Do your own search on the internet....some of the more frequently encountered trailer tires have a real marginal marginal/quality record. You need to go with real trailer tires (the load range will dictate this), and one thing you don't want to do is to mix radial and bias ply tires of any type. Also, the discussion has been about passenger tires vs. trailer tires. Light truck tires are available also, but again these are not really suitable for trailer tires, as you investigation will show.|
|This thread has more than 10 replies. Click here to review the whole thread.|