|Topic Review (Newest First)|
|07-29-2009 07:37 PM|
|timebandit||Soft wire wheel on a bench grinder.|
|07-29-2009 04:51 PM|
Once cured you will have to use mechanical mens. A dental pick or similar device works pretty well but depending on how many you have to clean it could be very labor intensive. I always just replace the fasteners, but then again I have not removed all my fixtures at one time. Good luck.
|07-29-2009 04:16 PM|
|07-29-2009 02:03 PM|
Removing 3M 101 from fasteners
I'm re-coring my deck and have hundreds of fasteners I want to reuse that are slathered in 3M 101 or equivalent caulk. What is an easy way to strip all the caulk from the fasteners?
I'm soaking a few test pieces in mineral spirits. What will get it off easily (dissolve it) without reacting with the stainless steel?