well I called Sailmakers Supply and they informed me the number 6 Delrin slides are a full .75" which is too big. I need something between .64" and .7" which they don't carry. They told me that there are other sizes especially metric sizes but wern't any help in directing me to t
where I could get anything. Still looking for suggestions on where I might find something.
08-06-2009 10:58 AM
I'll check out the #6 delrin slides as well as consider the strong system. Does anyone know a Canadian Supplier for the strong system?
08-06-2009 10:25 AM
"Metal Mast" does not mean the slides are metal. It means the slides are made for the "Metal Mast" track. They come in 2 sizes - #6 and #8. They also come in delrin or bronze. Check Sailmaker's Supply again. I suggest that you order a few #6 delrin slides and try them. They are listed as being 3/4" slides, but they might be smaller than that.
08-06-2009 06:59 AM
i put a strong track on last winter. it is great! release the halyard and the sail just drops. so easy to raise the sail anyone can do it.
08-05-2009 09:18 PM
Sounds like a new track, and probably the strong system might be needed. I'd rather save money and just get slides that fit but I haven't been able to find any listed online. I searched Sail makers Supply but they don't seem to have any 5/8" listed in metal. I may just have to make due with what I have for now and not go out in big winds until I can afford a new track. Anyone have any sugestions on where I can get 5/8" flat metal slugs?
08-05-2009 11:00 AM
"Metal Mast" slides have different dimensions than the standard nylon or plastic slides. I had a similar problem until I replaced the 3/4" slides with metal mast #8 slides which are 0.9" wide. There is also a metal mast #6 slide available which may have the correct dimension for your mast. Metal mast slides are available from Sailmaker's Supply.