|Topic Review (Newest First)|
|01-13-2012 12:25 PM|
added weight aloft????? bunk. is so little weight to rope in the making of lazy jax-- that excuse is for the lazy ones who dont see the use for them.
when sailing a heavy cruising boat, there is no reason to worry about the alleged weight of a couplafew lines and 2 rings for the home made jax-- and the prefab ones are so light as to be ridiculous on my formosa.
the safety factor of having and using lazy jax is an advantage that far outweighs any alleged weight problem. could be a problem for a 22 ft or under 30 ft boat--- but the safety feature/factor when cruising a heavy cruiser far outweighs any alleged weight aloft problem that might occur. the rope and rings weigh, what-- under a kilogram???? roflmao...weight problem... how about dousing a main sail on a 20 ft boom... in wind.... visibility is impaired sans lazy jax.
as for the canvas "problem"--- there are ways to make canvas covers conform to the addition of lazy jax, but if one is too cheap to spend a few extra dollars in the creation of a new sail cover, then i can not say anything about the problems one may incur upon ones own self. ditto with shade tarpage-- make them around the lazy jax. ANY canvas man worth anything knows hopw to make covers to accommodate them.
|01-11-2012 06:49 PM|
|JohnChristopherBalch||Did you make or keep a diagram of your system? I know your post is 3 years old, but hey, I'll take a shot.|
|08-21-2009 04:21 PM|
|M275sailer||Good idea hienz, I am going to try to rig something useing the topping lift. There is always something to be said for a K.I.S.S. system.|
|08-20-2009 11:10 PM|
Had lazy jacks on my Alberg, had a dutchman system on the Cal, and now have the Doyle Stackpack. LOVE IT!
Release the halyard and into the cover she goes, pull the zip, and done.
All from the cockpit.
ps: I have a full battened main with a tides sail track and ball bearing batt cars.
|08-20-2009 09:34 PM|
Lots of answers here. Mostly positive I see. Here is me.
I went for the Mack Pack. It is another brand. I chose it because.
I did not want my sail altered or added to.
No batten fouling - The lazy jacks are able to be loosened so when raising the sail just pick a tack, free the line opposite, pull to loosen, raise the main and re-cleat the jack line to the boom.
The zipper closure is sweet.
I throw the halyard forward so it will not jam. When I let go there is a whosh and a clatter as the slides come down oh-so-fast.
Freakin' amazing. Worth every penny - but then I thought I could afford it.
|08-20-2009 09:12 PM|
|artbyjody||Actually - concept is great and if just cruising - works. Otherwise, a pain to manage - had them on my Cat 27, fine for cruising but they are not pain free. Easier to flake the sails as they come down if you have something more than dacron.|
|08-20-2009 09:02 PM|
Here is the PDF manual for the StackPack Installation
Interesting... StackPack is supported on non-Doyle sails too!
|08-20-2009 09:48 AM|
Originally Posted by jbondy View Post
When I first saw the system, it reminded me of those honeycomb shades that are used on windows.
I hope that this helps.... It may be easier to look at the description on Doyle's website.
|08-20-2009 01:55 AM|
My vote is
Nay for Lazy Jack
Yay for EZ Jax
I guess I was feeling lazy (or lack of time? and pardont the pun) and bought my EZ Jax, and have been pleased with them. Storing them so you don't have the batten problem is a real plus IMO and you don't have to do any mods to your sail cover. I think they're less $ than Lazy Jacks too?
If I could have spent more $$$ I would have opted for a Stack/Mack Pack type set up. But I still don't like the way it looks when the sail is bent.
FWIW, I sailed on my Aunt & Uncle's Bristol 35.5 for several years, they had the Dutchman, they hated it, I didn't care much...I was just enjoying the rides. When it was time to replace the deteriorated lines they replaced with Lazy Jacks.
I also try to flake the sail differently each time so not to cause to much damage to the sail, but the convenience is simply worth it IMO.
|08-20-2009 01:29 AM|
|wookie||The Hardin I have bought has the Dutchman system although i have not had the sails up yet as the mast are down being overhauled the Surveyor said it worked well, the rigger who is doing the work on the masts, said he had it on his old boat worked well but didnt like the thought of holes in the main sail|
|This thread has more than 10 replies. Click here to review the whole thread.|