DieselThis is a forum dedicated to diesel engines and their applicable accessories.
Topic Review (Newest First)
05-24-2011 12:25 PM
Hey, thanks very much! Saved me some bucks
05-24-2011 05:56 AM
Messicks 800.222.3373, part #15852-73030 pump & 15841-73432 gasket. good luck
05-23-2011 02:30 PM
I'm having a hard time finding this pump - any chance I could talk you into sharing the name of the tractor place in question or the Kubota part #?
09-23-2009 08:25 PM
I like to give the gasket a little permatex myself, presuming it's an impregnated cardboard-type.
09-23-2009 08:18 PM
I got the new pump via UPS today and it looks like the tractor pump is an exact fit. I will know for sure when i try and install it this weekend. Do i just use the new gasket. It looked like the old one had some kind of sealant besides just the gasket
09-21-2009 06:06 PM
Update. I found a guy at a tractor parts shop on the internet and he measured the distance of his stock unit and it was 3/8" from the back of the mounting plate to the back of the impeller. I ordered it and since it was stock i can return it if it is not right. 107.00 vs 300.00. Who puts the outrageous mark up on them. Westrabake or the marine parts house???
09-21-2009 05:57 PM
As long as the Kubota pump will fit, you should be fine. Last time I bought a raw water pump from Westerbeke/Universal it was over $400. So even $300 doesn't sound awful.
09-21-2009 03:41 PM
Sorry my bad.. hope I don't need one someday I've a 5416
09-21-2009 03:39 PM
this is for the freshwater pump. not the seawater pump
09-21-2009 02:11 PM
the pump is an oberdorfer no? $300 is way high if so!
This thread has more than 10 replies.
Click here to review the whole thread.