|Topic Review (Newest First)|
|05-24-2007 12:55 PM|
Corny as this sounds I practice with my emergency tiller many times a year and I even dock with the emergency tiller on a good windy day. If I loose steering I’m not going to flinch, it should only take me 20 seconds to regain full control and be underway and able to meet any challange.
My setup is unique, I have a 6’, 30 pound T made out of 2” pipe that sits right over the original tiller attachment. The reason for the height is to be able to clear the new binnacle and the weight is for strength. To fasten I just insert a bolt and hand-tighten.
Might be overkill but it’s worth it for me.
|05-24-2007 12:16 PM|
|Giulietta||I don't have an emergency tiller...|
|05-24-2007 11:45 AM|
I took EscapeArtist's excellent advice and rigged the emergency till on my Tayana 42 yesterday. Ah, that is a lovely chartplotter I had installed! If I punch a hole through it I could probably get that tiller rigged. Actually, given the aft location of my helm I don't think the tiller would have worked even without the plotter. The only way I can rig it, without cutting it down to an unusable length, is with the tiller out to port or starboard. I haven't tried to stear it that way yet but it seems to me the helm interfering with the tiller issue is probably not unique to my boat.
Excellent advice from EA and others, you don't want to be finding suprises when you really need it.
|05-15-2007 05:08 PM|
|sailingdog||Glad to help Joel. Save the pretty laminated wood for a tiller that's going to see the light of day in normal use...|
|05-15-2007 04:48 PM|
|Joel73||SD- Great idea and maybe easier to make than a wooden copy of my current tiller. thanks.|
|05-15-2007 04:20 PM|
|abbarr||Out of sight out of mind is a great reason to check on the state of your emergency tiller. When I checked it on a friend's boat, prior to cruising up the coast, i found that the coupling had deteriorated to the point of being completely useless. It was one of the first things I put to the test on my boat.|
|05-15-2007 03:48 PM|
Originally Posted by Joel73
|05-15-2007 01:37 PM|
|SVDistantStar||This is one of the downsides of the location of my pedistal(i know i cant spell). It has been moved far aft in my cockpit, rendering a tiller un-useable. My boat is a Pearson 36, and they have a pedistal in the front of the cockpit from the factory. Im going to move it back to this spot and make a tiller for the rudder. The top of my rudder shaft is square and there is a large deckplate above it to access it. I hate it when people change things around and dont even think of whats going to come from it.|
|05-15-2007 01:12 PM|
|Joel73||As another newbie around here i found this thread quite interesting... a good one to revive because of safety. We don't have an emergency tiller so that has become the next project... I wonder what kinds of wood i should consider? Oak is good and solid... would that be a good choice?|
|05-10-2007 05:29 PM|
It would help if you said what kind of boat you had... without that... it makes it pretty hard to guess if anything will work. BTW, probably better off starting a new thread just for that... this one was pretty dead.
|This thread has more than 10 replies. Click here to review the whole thread.|