|Topic Review (Newest First)|
|10-06-2009 01:01 PM|
Well I will be smelling exhaust and checking over the Perkins tonight.
The max continuous operating rpm is 3000 so 2100 seems fine although I may go down to 18000.
The Perkins manual was not much help on this but did give a few suggestions like oil in air cleaner or Piston Sizure worn valve stems etc.
|10-05-2009 10:11 PM|
|speciald||White smoke = water or cold engine.|
|10-05-2009 09:35 PM|
Nigel Calder sez
"Lack of Compression, Water in the fuel, Air in the fuel, Defective injector, Cracked cylinder head/leaking head gasket"
|10-05-2009 09:26 PM|
|Martinini||Sounds like a Perkins 410ain't. Not good.|
|10-05-2009 08:49 PM|
I just wrote a very long post for you and the system ate it...I don't have it in me again...Sorry
Short answer steam or unburnt /fired fuel one or the other..smell it it will tell you.
|10-05-2009 07:25 PM|
White smoke coming from my Perkins 4108?
We just came back from a motor on our sail boat. Were at 2000 rpmís going and 2100 rpmís coming home. Few miles each way. When coming home it was a bit of nasty weather wise. Two blade prop and a 36 foot boat 1700lbs. Why would we get white smoke from the exhaust and what does it indicate? I thought it was from overheating but the Perkins never got over 190 if the gauge is correct. About a 1000 hours on the 1978 motor.