Epoxy primer followed by a non-skid deck paint is what I have used on my floorboards with good results. i took them out for a week to assure that they were thoroughly dry before sanding and coating them.
11-24-2009 09:12 AM
It's most important to seal the edges so the plywood doesn't delaminate.
11-24-2009 01:25 AM
how about coat it in epoxy then do a " hot coat " with something like bright sides. ie paint the bright sides on it when the epoxy is still tacky
11-23-2009 11:33 PM
Inflatable plywood upkeep..
I just acquired a (slightly used) Avon with a plywood sole? thats needs paint.. suggestions? Top sides seems wrong since its usually wet..