|Topic Review (Newest First)|
|12-19-2009 11:34 AM|
|smbragg||Perfect! What a resource. Thanks a million!|
|12-19-2009 11:31 AM|
There's tons of info on here - as well as many, many salts that will talk you through just about anything.
You can start poking around in this thread: The Salt's Corner Table
It's a thread with some of the best info to some of the most asked questions around here - including yours. And you can see who some of the go-to guys are.
|12-19-2009 11:27 AM|
|smbragg||Thanks to all. Thanks Davidpm--good advice. And I will look up threads. This is like going back to school--but more fun!|
|12-18-2009 07:56 PM|
|Garffin||Welcome to Sn!|
|12-18-2009 05:36 PM|
Originally Posted by smbragg View Post
A fiberglass boat that has thick hull layup may be stiff enough to handle the stresses of 30 years. Or it may lack sufficient stiffeners and gradually work itself to death. Or it may have sat at a dock for 30 years and had not stress at all but the engine is shot.
It's not simple but some main points are as follows:
1. Boat should be stiff enough to not "work" and damage the fiberglass
2. Stiffness can be achieved by heavier glass or internal support.
3. Heavier glass makes the boat slower.
4. Internal support costs extra
5. If the boat was never used it doesn't matter much.
So you can see you can't really go by old adages but have to look at each boat. How was it built, how was it used or misused or damaged or repaired etc.
You could easily find an old heavy boat that is tired and worn out.
You could find a new well made light, but properly supported boat in great shape.
Of course you could find a newer boat lightly made and heavily used that is shot too.
I've done nothing but look at a lot of boats the last few years and I've come to one conclusion. Each boat stands on it's own. There are absolutely no rules you can apply without looking at the specific boat.
|12-18-2009 04:39 PM|
|12-18-2009 04:36 PM|
|Faster||Welcome to Sailnet.... as to your first question, the (many and varied) answers can be found in existing threads here already... explore and enjoy!|
|12-18-2009 04:19 PM|
|smackdaddy||Hey sm, welcome to SN dude.|
|12-18-2009 03:38 PM|
My first post
Greetings. Just retired to Florida Gulf Coast. Raced small boats (Capri 22 last) in midwest. Sold it when moved--looking for coastal cruiser 32 to 36 feet. Lot to learn about auxiliaries and cruising--different species than racing. But can sail in winter here!!!! Look forward to benefiting from more experienced and seasoned members.
First question: How much importance to ascribe to adage, "Older boats have better (thicker, little or no core) hull layups?