|Topic Review (Newest First)|
|01-26-2010 02:31 PM|
More progress today, this will give you a good idea what it will look like. I have room for the panel, a separate AC panel, a voltmeter and two radios...
|01-26-2010 02:37 AM|
|sailingdog||Listen to faster... banging your knees sucks...|
|01-25-2010 07:00 PM|
Looks like a sensible modification, eM... you're not wasting any time!
I'd be careful about how much you add underneath there.. make sure you don't compromise the ability to sit there comfortably.
|01-25-2010 06:48 PM|
Cool. I made all new cushions for my C27. It's not all that hard once you get the hang of it. But jeez that foam was expensive!
Hey - at some point we've got to race each other - long distance. Big Freakin' Lake Sailors' Battle Royal of the 27s!
|01-25-2010 06:45 PM|
|eMKay||Yeah well, my burgundy Sunbrella shipped today, so look for my post on throwing all that nasty stuff out soon|
|01-25-2010 06:14 PM|
Very cool em. Keep up the good work.
And just wait - plaid is going to make a HUGE comeback!
|01-25-2010 06:09 PM|
Hunter 27 revival post #2 1/25/10
Now that my boat is home I have accelerated the work on the electrical system and the nav station conversion. As I outlined in my previous post I wanted a nav station like the later H27's and I want to move the electrical panel up to a normal level, and not on the floor like it is now. Here is the hanging locker as it came from the factory...
Here is what I have done today, it is not finished, I still have to put the trim on, and install the other half of the table. It will hinge up into the port setee instead of into the quarterberth. I also have to build the electrical panel, that will be flush with the existing cabinets.
Taking it apart was easy, it's all screwed together with bronze screws. The plywood is very nice though, solid teak plywood not veneered, so I am building the new nav table out of the old locker.
I cut down the forward part 5" and removed most of the rear part so my legs will fit under...
And the new nav station halfway finished
I still haven't decided what I want to do underneath. Probably some small shelves along the hull, and maybe a deep pocket for charts.