|Topic Review (Newest First)|
|02-26-2010 04:27 PM|
Davis Fender tender. Yeah those things are a joke. As well as those wire bolts, which squeeze the shroud to attach things to it. Ugh I hate those. The cajun probably wouldn't work to lock the tiller in a storm, I agree, but at that point can't you just lash the tiller in place with a constrictor knot?
I guess the various tiller add ons do offer some convenience in that situation.
|02-26-2010 03:13 PM|
Tiller combs are a great if old-fashioned solution. I would use one but I have an autopilot... and if I need to just hold the tiller...I just use the autopilot, but leave it turned off...
Originally Posted by knothead View Post
|02-26-2010 03:04 PM|
Originally Posted by tager View Post
For flag halyards, one can buy a shroud cleat. It's made out of aluminum and stainless and doesn't do your shroud any favors.
Or, one can take a cheap little plastic cleat, groove out the bottom with a Dremel to accept the wire and seize it on with some waxed twine. Both will work just as well.
For hanging fenders, one can buy a plastic clip thing that you tie your line to and then hang on the lifelines.
Or, one can just tie directly to a shroud, hand rail, toe rail, genoa car or stanchion base.
You won't bend your stanchions, loosen the bolts and create leaks if you don't hang crap on your lifelines.
I love using line for things that other people feel they need to buy little metal and plastic things to do.
I really like the Cajun thing too, but only in certain conditions.
I was hove to or extremely close hauled in heavy seas for a period of 5 days once and the tiller comb that was holding my tiller never slipped once.
As much as I love knots, there is no way that the Cajun thing could do that.
What you make, buy, and ultimately use for taming your tiller, as well as every other system on the boat, depends on how you want to use the boat and how trouble free you want it to be.
|02-26-2010 01:31 PM|
|tager||The cajun has immediate release, just slide her aft.|
|02-26-2010 01:28 PM|
Using bungee cord for the tiller tamer also allows for immediate release - just slide it off the end of the tiller.
|02-26-2010 01:03 PM|
|tager||I don't know. The cajun setup is pretty corrosion proof too. Cheaper. It has multiple uses (line.) The cajun setup is cheapest. The cajun setup has simplicity on its side. I like it.|
|02-26-2010 12:58 PM|
|kokopelli9||well, the TillerClutch is not plastic...it is all metal...permantly lubricated and protected against corrosion....it's the ticket as far as i am concerned...|
|02-26-2010 12:38 PM|
|tager||Hah the cajun setup owns. Makes all of this silly business with bits of plastic seem a bit stupid.|
|02-26-2010 12:15 PM|
|kokopelli9||Let me tell you about the TillerClutch...it is wonderful!! One of the biggest differences that i like about it from the tiller tamers is the quick release...you are not having to tighten or loosen anything with it...just a quick click and it's done...so if you get in a bind and need to release, it only takes a second...it is also much more durable, very well made...go to the Wavefront Marine site and read about it...everything is true...it is small but can take what it has to to handle your tiller for you...the sail community that i am part of love it...we have several who are using it and would not go back to any other method of taming their tiller. Worth every dollar!!!!|
|11-17-2009 01:43 PM|
I like my Tillerlock.
No chance of slipping.
|This thread has more than 10 replies. Click here to review the whole thread.|