|Topic Review (Newest First)|
|02-13-2011 11:57 AM|
|donradclife||If your Perkins filter mounts with the open end down, you need to make sure that you use genuine Perkins filters or that the filters you use have an anti-flowback valve, which not all the generic cross-references do. Otherwise the oil will drain out of the filter when the engine is off, and it takes too long to build oil pressure when you start the engine.|
|02-01-2011 07:36 PM|
I buy most of my Perkins stuff through S&W Desiel S&W Diesel, Inc. Perkins Engine Sales & Service
These guys are a great resource and will bend over backwards to help you out.
Even if you do not buy anything from them they are a good resource.
|02-01-2011 08:59 AM|
|SimonV||Perkins 4.108 are used the world over, a majority are in farm tractors, pumps and generators. I just picked up 4 from a farm supplies at 1/3 the cost (made in Malaysia) but perkins specs. Ryco Z103 wereabout $30 here in Oz.|
|02-01-2011 08:05 AM|
Originally Posted by BELLATRIX1965 View Post
|01-31-2011 07:48 PM|
Careful with FRAM!
Fram (the orange ones) used to be the "standard" for spin-on L.O. filters - I have read of issues lately with these filters - Google same and check - so they don't seem to be as good as they once were. Things like the non-flowback valve, the relief valve (these are normally full-flow filters, and if they plug up for some reason, the relief valve allows oil to bypass the element and not starve the engine for oil), and the internal element end caps are all critical. Not to mention the filtering media itself.
The Fram PH2821a should cross to a WIX 51806 (double check me on that) - WIX has gained quite a reputation for quality filter construction - they make the "gold" NAPA filters, and are also readily available at auto part stores and Wally World. DON'T spend crazy money on "Perkins" brand filters, but DON'T risk your engine on cheapies either! Happy Motoring!
|01-31-2011 11:06 AM|
|lancelot9898||I buy my oil and fuel filters for the Perkins 4-108 from a local diesel truck parts shop. This last time they did not have the Perkins name brand fuel filter so I went with the equivalent, however I do like going with the Perkins name brand instead. The Perkins oil filter has two sizes and I've been installing the larger of the two for the past 5 years or so. The fuel filter that I replaced last year is different in internal construction than the Perkins brand and this year I'll try and return to the original brand even though it may not make a beans worth of difference. The Trans America website (tadiesel.com ) has most Perkins parts including gaskets which are hard to come by and I'll be ordering from them soon.|
|01-30-2011 02:31 PM|
i get mine at walmart.. napa is better than wallys but..... pricing is good at wallys... all our filters are in NAPA and is easy to find em-- good guys there--
gawdIREADTHAT21DOLLARANDSPEWEDCOFFEEONSCREEN,...yi pes...not that pricey in wallys or in napa...
CHIP!!!!1 follow me when i buy parts..LOL..aint payin no retail much less retail plus 400 percent for anything....
|01-30-2011 10:35 AM|
|Sailgal5||it's a Fram PH 2821a|
|03-05-2010 11:46 AM|
I stopped at Admiralty Marine on Rosecrans and picked one up but think I will return it. It is a really good filter for $21.00 though.
We will be repowering in a year so no need for such a nice filter.
Napa will work fine.
|03-04-2010 04:56 PM|
|zeehag||i actually found mine in walmart in national city....|
|This thread has more than 10 replies. Click here to review the whole thread.|