|Topic Review (Newest First)|
|02-13-2011 05:33 AM|
Originally Posted by tip View Post
|01-27-2011 11:25 AM|
Originally Posted by fairbank56 View Post
|03-15-2010 09:16 PM|
|CLucas||Rule has an installation wizard in the Product Support section of their web site at Rule Support Centre > Rule - ITT. It explains exactly how to wire your pump.|
|03-15-2010 09:04 PM|
This is DC, not AC. Reverse the polarity and the pump will run in reverse and not function properly.
|03-15-2010 07:14 PM|
|xort||with bilge pump switches that isn't necessarily a good idea. I think the pump will work with either polarity but you will have a hot circuit in the bilge water with potential for electrolisys|
|03-15-2010 06:43 PM|
Rule pumps come with a brown, brown with white stripe, and black wires. Black is negative, brown is positive (for automatic operation), brown with white stripe is switched positive for manual operation.
|03-15-2010 06:04 PM|
|tip||** don't have it on me now, or else I would just hook it up and see. Going down to the boat after work.|
|03-15-2010 05:54 PM|
Rule Bilge Pump wiring
Quick simple question (tried searching Rule site and google):
Is the white wire (+) and brown wire (-) ?? No marks on pump, pump was uninstalled, given to me by PO.