|Topic Review (Newest First)|
|03-19-2010 05:53 PM|
Originally Posted by chef2sail View Post
And thanks everyone for the ideas on latches. I really appreciate it!
|03-19-2010 02:13 PM|
Moroso Quick Fasteners - JEGS
Not sure on stainless though.
|03-19-2010 12:24 PM|
Check out this. I know its not teak, but its a simple solution. It removes easily for work, it pivots so you can work on the wires without removing them, it can fully enclose you stereo to protect it against dust and moisture. We leave the faceplate open when we use it, also have a remote. When we leave the boat or not in use we close the smoked front faceplate. Ours is at/ above our Nav station also
Poly-Planar Stereo Weather Enclosures
|03-19-2010 11:01 AM|
|topsailbeach||The Gemini latches work well spray with silicone lube on plunger to stop sticking as they will when not used frequently|
|03-19-2010 10:07 AM|
Originally Posted by Omatako View Post
The teak is 1/2" marine ply, so it's plenty strong. I think the 304 is fine for interior, but I'm still open to suggestions on how to enclose and keep it as simply (but looking decent) as possible. Here's a pic of a nav station like ours, though it's not our boat. I'm enclosing the space above the shelf, but only about half of it--the half that's over the nav desk.
|03-19-2010 08:42 AM|
|bljones||Cool idea, denise.|
|03-19-2010 08:32 AM|
It may a bit much advanced to make but a tambor would work nice for an enclosure like that. it's a roll up thingy made of slats.. like you see on big old roll top desks. they can be bought from places like Rockler.com but not in teak i'm sure.
Cable Tambour - Rockler Woodworking Tools
|03-19-2010 08:06 AM|
|bljones||SD, I'd be worried about stainless if it was an exterior app, or an interior app constantly exposed to air. Neither is the case here.|
|03-19-2010 01:20 AM|
try looking at jegs, the auto parts place they have a wide selection of quarter turn fasteners, not sure about stainless.
or look at the latch that gemini cats use for the lockers on their boats, you might be able to adapt them. you might even be able to get them from performance sailing direct, so no shipping.
they are shown a few times in this vid
YouTube - Gemini catamaran walk-through
|03-19-2010 12:20 AM|
Originally Posted by sailingdog View Post
Is this thing that you're making going to support the radio or is it just a cover? If it is just a light cover it may be easier just to use Velcro.
|This thread has more than 10 replies. Click here to review the whole thread.|