I have a small sail boat that I can not identify by manufacturer's name. It is sloop rigged, 13 ft long, with a 5 ft beam. All fiberglass construction with a plywood transom. The dagger board and rudder are made of teak (I think) The mast is an Ian Proctor, 21 ft, aluminum mast, 2" Tear drop shape, anodized gold. The rudder rides on two pintels. It is held in place by a stainless steel spring clip. It has molded seats with voids beneath and drain/fill plugs in the forward corners. There is also a void - with drain/fill plug made into the bow which creates a small storage platform. It has thick rubber molding along the chime where the deck and gunnel meet. (Originally the two halves were stapled together)
Here is a link to some photos taken during overhaul. I will post more as I get them. Thanks for your help.