|Topic Review (Newest First)|
|04-22-2010 04:03 PM|
and this thread has gone way off topic...
I found some teak. I can crosscut, rip, and route. Thanks for the help everyone. I'll post picks when we get to this step.
|04-22-2010 07:42 AM|
|JimsCAL||If having teak pieces made up is beyond your budget, consider making them up from several pieces of stock hardwood glued together with waterproof glue and then varnished. Won't have the strength of a single piece or the rot resistance of teak, but if properly maintained will last for years.|
|04-20-2010 12:30 PM|
A month ago I was at ML Condon in White Plains, NY buying some teak. The board foot price I was quoted was $20+ with wider and thicker pieces costing more. I found a bin in their yard marked 'teak rippings' $5/bd. ft. and snagged 7 board feet for $35 instead of $140.
Good luck in your quest for teak.
|04-20-2010 10:57 AM|
|mitiempo||It does really require a table saw and a router table to make a nice job of it.|
|04-20-2010 08:50 AM|
Getting teak stock only half the battle, unless you are a good finish carpenter, I don't think this is a DIY job.
I 'd try a local custom sign-maker, the kind that does artsy signs carved in wood, and give him/her the existing rail and ask then to duplicate it. Maybe $150-200, but it will look good and you can be ready to go in two weeks.
|04-20-2010 05:35 AM|
|Freesail99||Lumber liquidators often has teak and mahogany "Bella Wood" pre finished solid wood flooring in thickness of 3/8 to 3/4 and in widths of 2 to 3.5 inches. If you catch a sale it can be had for $2.25 a sq ft.|
|04-20-2010 01:18 AM|
Another wood that looks like teak, seems to act and behave like teak is commonally called Iron wood. You might be able to find this at a local lumber yard vs teak. They look similar.
You will have to let your fingers do the walking in the yellow pages. Seems like any major city like a chicago, Seattle where I am , Vancouver where Brian is, seems to have one lumberyard that carries teak in a decent supply, then a few others with odds and ends, and a nice supply when the boat comes in.
|04-19-2010 11:44 PM|
|mitiempo||Teak is rarely stained. Most often it is chosen for how it looks to start with. Mahoganies are redder than teak and are stained very often.|
|04-19-2010 11:29 PM|
|itsme6582||Board feet prices never came up in my math classes (Mechanical Engineering with a Math Minor). Thanks everyone for the help. This should put us in the right direction. Tom's got an old table that is literally falling apart. I'm pretty sure it's teak. I'm not a wood expert but the grain looks like teak. The table isn't a nice silver/gray color though. It's red which I think is from an old stain. The edges where the stain has worn away are the grayish color. Any ideas on what this could be if it's a teak imposter? and how could I figure it out?|
|04-19-2010 11:17 PM|
A board foot is the standard measure of hardwoods for sale. A board foot is 12" x 12" x 1". For a piece 8' x 8" x 1" the math is 8' x .66' x 1" = 5.28 board feet x the normal price of $30 for teak, the most expensive readily available exotic hardwood. Some areas may have higher prices.
I just looked at the Cleveland yellow pages - there are dozens of flooring companies in that area but I didn't find teak mentioned anywhere.
Welcome to M.L. Condon Company in New York is a respected marine hardwood supplier but I don't know if they ship. You could email them or call to check.
They are regular advertisers in Woodenboat magazine and have been around for decades.
|This thread has more than 10 replies. Click here to review the whole thread.|