|Topic Review (Newest First)|
|04-26-2010 07:11 PM|
The halyards pretty much should exit out the slots that are lined up with the sheaves they come out of in the masthead truck. On many boats, there are four internal masthead sheaves, two forward, two aft... and they're generally used for topping lift and mainsail halyard for the two aft ones and spinnaker and jib halyards for the two forward ones.
Originally Posted by mgdm View Post
|04-26-2010 06:16 PM|
I was in Daytona Beach yesterday and looked at a 1973 Jouet 33.
I cant really find any good info on this boat. I am new to sailing and the boom seemed very short to me, what are your thoughts on that? Have you sailed this boat and if so, what are your opinions on it.
I am also looking at a 1985 Jouet 32 in NC.
|04-14-2010 04:34 PM|
Jouet Fandango/33 running rigging
I've been helping someone out with setting up a Jouet Fandango (later known as the 33), and today was spent disentangling some of the lines going up the mast. However, I'm not entirely convinced that a couple of the halyards are exiting via the correct slots in the bottom of the mast. Does anyone know if there's a manual of some description that documents where these should go? I'm going back there with a camera tomorrow, FWIW.