|Topic Review (Newest First)|
|06-12-2012 01:21 PM|
re: 1974 pearson 30
Ditto on all things metioned about the P30. I love mine. I really enjoy being faster than the other mass produces 30's of that era.
|06-11-2012 02:26 PM|
re: 1974 pearson 30
Greetings! YOUR Hildy is up for sale in Lake Lanier and I am considering purchasing her. I see where you installed a two cylinder Universal diesel (year?). Do you know if the gate valves were replaced with marine grade seacocks? Any issues with the keel (grounding) or bottom (blisters, etc.)? Any problem with leaks around/under the attached fittings topside? When was the last time she was out of the water and the bottom cleaned/painted? Sorry for all of the questions. As you can probably tell I am a sailing novice. I haven't sailed in 20 years but want to spend weekends cruisng and sleeping aboard now that I am reaching retirement.
You were very fortunate to spend 35 years with Hildy. It must have been difficult to let her go.
Thank you so much for sharing.
|07-20-2010 09:26 AM|
Originally Posted by Jeff_H View Post
|07-20-2010 08:49 AM|
The P30 has an encapsulated keel.
|07-20-2010 08:22 AM|
I have always liked these boats. They sail well and are generally well mannered. A couple issues that I have heard of over the years on some of these are problems with the 'scimitar' type rudder. This places a lot of strain on the rudder post to rudder connection and water can get in and cause problems over time with the stainless steel frame of the rudder. There were apparently two different types of internal frames on the P-30 rudder, the later ones having an aluminum framework instead of stainless steel. These were not as good in terms of durability.
The one that I knew best had gate valves that ultimately had to be changed out to marine grade seacocks.
The Pearson 30's had an outward facing flange type hull to deck joint. I have never been a big fan of this type of joint being inherently the weakest and most vulnerable of the choices. From what I gather, the P-30's have not had the kinds of problems of boats like the Catalina 27 but the one that I raced on did leak back by the quarter berth when heeled hard.
I can't recall whether the P-30 has a bolt on keel like its smaller sister of that era, the P-26, but at least in the case of the P-26 the keel bolts and and internal structure has not stood up all that well over time and has typically needed remedial repairs. I would carefully check the keel to hull hull joint if it is a bolt on, or the encapsulation if its not.
|07-20-2010 07:48 AM|
Originally Posted by radiance91 View Post
|07-20-2010 07:30 AM|
Other than CLucas' comments, not much to say. He pretty much covered it all.
The P30 is a "performance cruiser." Set up and sailed right, they can be very fast for their class.
Enjoy your P30. They're terrific boats
|07-20-2010 06:46 AM|
I love my P30
I completely agree with Grey Goose. I hated the color of the deck, it was green so I painted it. I have owned my P30 since 1996 at 1977 hull number 942,
This photo was taken yesterday while sailing in the ocean off of Long Island, NY..isn't she pretty!
|07-18-2010 02:41 PM|
For some more adventures of those with P30's, read this "what is a wilson?" about 3 letters to editor down the page!
This boat I found out was on the east cost, owned by a friend of "Mr Wilson" from childhood. They used to sail it with the 3 kids and a nannie, yes that is right, 6 on board! anyway, as they embarked to move back out here to the west coast, they found an endevor 40, an eve BIGGER old shoe, sold the boat to Mr Wilson. Whom by the way is somewhere up in the sanjuan islands right now, storys of this yrs trip to be made at a later date!
|07-18-2010 01:54 PM|
|hobbits||thank you lou ann and clucas.very helpfull.|
|This thread has more than 10 replies. Click here to review the whole thread.|