|Topic Review (Newest First)|
|10-31-2010 01:37 PM|
I'm spec'ing out the sheaves and have a couple questions. One sheave is bigger than the rest but I am not sure of the reason or if I need to follow suit. Three of the old sheaves are 2.625" and the last is 4". The big one was on the starboard stern side and is for the main halyard. My only thought is that their may be more load on this sheave and that is why it is bigger. No mechanical advantage is gained. These sheaves were for wire. I am most likely going to run line. It is more convenient to get four of the same and maybe a spare than to have an odd ball. Is it important to keep the main sheave larger for some reason that I am overlooking?
And what diameter halyard do I need?
Any recommendations on where to buy halyards, bossons chair, things of that nature?
|10-31-2010 01:05 PM|
Zephyrwerks The Sheave Factory
make you what ever you need at very good prices
good luck with the new boat
|10-31-2010 12:03 PM|
Thank you everyone for the advice. It was well received.
I ended up buying this boat. No remorse what-so-ever. It is my first boat- it is everything I was looking for and more. She has definitely been some work but in doing this work, I am building a connection with her and learning her ins and outs. Wouldn't have it any other way.
The first 'big' ordeal has been the sheaves. The sheaves in the mast head were seized. I scaled the mast but wasn't able to get them loose while up there. They were really stuck. The mast has a tabernacle and the next step was to lower the mast to be able to get at those sheaves better. Nerve racking as **** the first time through but we managed without a hiccup. Got the sheaves out and now it is time to purchase new sheaves and clean out the mast head. Any advice on a spray to help clean the head out? A wire brush will be my primary. And any advice on what to install, sheaves and line wise? I think I am going to side with all line halyards vs line to wire. Seems much easier, straight forward and without a downside but my knowledge on the topic is nil.
This has been about the only thing going my way in life, presently. Gotta get out of the box and do it. Sometimes that box looks as those it is 6 inch thick steel. In reality it is paper thin and punching a hole through it is effortless when in the right mindset. Happy sailing.
|10-22-2010 02:22 PM|
|Waltthesalt||Look for hull blistering|
|09-21-2010 08:40 AM|
Things to check;
Even though the boat is only $1700, a survey would still be advisable.
Here is an illustration of why:
Here is a picture of two of the keel bolts in the bilge, as I saw them when I first looked at the boat;
Yes, the bilge was dirty, but I figured that I could clean that up.
During survey, I noticed that the keel didn't quite look right. To me, it seemed that the keel was off center about ¼". Here is a pic that I took during the survey of the keel stub joint;
Several people present (yard manager, broker, and IIRC even the surveyor) said that was normal. I persisted and the surveyor and I eventually discovered that the keel could rock side to side about 1/8". The survey came to an early end.
... and here are the exact same pair of bolts after the keel had been dropped;
You can see another keel bolt to the left that is in similar condition. Of the eight keel bolts, THREE were OK. The keel bolt in the right of this picture is an example of what I consider to be OK.
Bottom line is that this repair is costing the current owner (not me!) over $8K to get this fixed.
|09-21-2010 07:53 AM|
Methinks as long as there are no gaping holes and such......have fun and go sailing!
If money can fix it -- it ain't broke!
1967 Cal 30
|09-21-2010 07:46 AM|
I would sure do some serious poking as Cals do have there issues
|09-21-2010 12:09 AM|
Originally Posted by jackdale View Post
If it floats, go sailing!
|09-20-2010 11:08 PM|
Hire a surveyor to check it over. The results of his findings should be a condition of sale.
Your insurance company may insist on a survey.
The boat should be hauled for the hull inspection - by the surveyor.
|09-20-2010 10:53 PM|
|sailortjk1||Wet deck core, leaky chain plates, rotten bulk heads, leaky port lights, soft mast step....|
|This thread has more than 10 replies. Click here to review the whole thread.|