SailNet Community - Reply to Topic

   Search Sailnet:

 forums  store  


Quick Menu
Forums           
Articles          
Galleries        
Boat Reviews  
Classifieds     
Search SailNet 
Boat Search (new)

Shop the
SailNet Store
Anchor Locker
Boatbuilding & Repair
Charts
Clothing
Electrical
Electronics
Engine
Hatches and Portlights
Interior And Galley
Maintenance
Marine Electronics
Navigation
Other Items
Plumbing and Pumps
Rigging
Safety
Sailing Hardware
Trailer & Watersports
Clearance Items

Advertise Here






Go Back   SailNet Community > On Board > Gear & Maintenance > Blisters, yes another blisters thread
 Not a Member? 


Thread: Blisters, yes another blisters thread Reply to Thread
Title:
  

By choosing to post the reply below you agree to the rules you agreed to when joining Sailnet.
Click Here to view those rules.

Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:
 

Register Now

In order to be able to post messages on the SailNet Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
Please note: After entering 3 characters a list of Usernames already in use will appear and the list will disappear once a valid Username is entered.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Click here to view the posting rules you are bound to when clicking the
'Submit Reply' button below


Additional Options
Miscellaneous Options

Click here to view the posting rules you are bound to when clicking the
'Submit Reply' button below


Topic Review (Newest First)
10-24-2010 06:25 PM
PorFin I just noticed you haven't yet gotten an answer about surface prep prior to painting, so here goes:

Follow the instructions of the paint manufacturer. THey are usually very comprehensive, and often include use of proprietary prep washes that promote a good bond between the hull and the paint.
10-24-2010 06:22 PM
PorFin
Quote:
Originally Posted by mitiempo View Post
One thing I can think of is amine blush. The epoxy should be scrubbed with a scotchbrite pad and water then rinsed well before the anti fouling paint is put on. This might be the problem.
Couple of things to add.

Brian's probably right. If the amine blush wasn't removed after that last coat of epoxy had cured, then this could be the cause of your water ingress.

If you want to dave yourself some time & effort next time you do the fair/fill kibuki dance, try using cabosil/colloidal silica as a thickener. You can probably completely fill your craters in one go.

If you elect to go without cabosil and go the multiple coats of unthickened epoxy route, don't let it fully cure before you apply the next coat. As long as it's still soft enough to "grab" the fibers in a cotton ball (or you can indent it with a fingernail), it's ready for the next coat of resin without further prep. This is actually preferable to letting it fully cure, since you'll achieve a chemical bond between the layers instead of a mechanical one.

If it gets too cured for the above, then let it go to an almost full cure. Before you have at it with sandpaper, like Brian said give it a good scrubbing with a green ScotchBrite and water, then rinse well. This will remove the blush that accumulates on the surface of the epoxy. Then sand it for the next coat.

BTW, if you've removed the blush from your surface layer of resin you won't need to do it again next time you sand/paint.
10-24-2010 12:22 PM
mitiempo One thing I can think of is amine blush. The epoxy should be scrubbed with a scotchbrite pad and water then rinsed well before the anti fouling paint is put on. This might be the problem.
10-24-2010 12:15 PM
johnnyandjebus Hello all, thanks for the replies

To clarify a bit.

Approx 10 years ago the hull was stripped of all anti-fouling paint and then 8 coats of epoxy resin were applied, no filler added. This was done by my father and he can not recall the details has to how he went about doing this other than what is mentioned above.
Each spring if I find any blisters that appear to have penetrated the epoxy barrier coat, they are dremmeled and dried out. I sand the anti fouling paint away, approx 4 inches radius around the blister and apply epoxy to it, no filler. Usually 2 - 3 coats, sanding and feathering in between.

The vast majority of the blisters are water trapped between the anti-fouling and the epoxy barrier, which leads me to believe, as suggested, that I am not prepping the hull correctly before the anti-fouling paint is applied.

So, next spring, should I sand down the anti-fouling to bare hull and start with a fresh layer of anti-fouling?
My main concern is to get things done right, an ounce of prevention being worth more than a pound of cure.

I am currently using Interflux bottomkote XXX as my anti-fouling paint.

Thanks,
John
10-23-2010 11:09 PM
mitiempo PorFin beat me to it but the resin makes a big difference. If the hull was coated 10 years ago with polyester resin it would not be more effective at stopping water absorption than the original material, also polyester most likely. Epoxy is the best choice for barrier coats (Interprotect is epoxy) and 5 coats or more are necessary to build up enough thickness.
As far as the bubbles in the anti fouling paint it could be causes by not prepping correctly.
10-23-2010 08:47 PM
PorFin John,

You mentioned using "resin" twice in your OP -- once to fill/fair minor repairs, and once for a barrier coat. What type of resin are we talking about? Epoxy? Polyester? Vinylester? It does make a difference.
10-23-2010 07:36 PM
St Anna Hello,
I had something similar a few years ago.
The reason was the 2nd coat of barrier seal was put on outside the recoat time and did not bond. I stripped it back about 3mm and re-epoxied, barrier coated etc. It was by far an overkill solution but it is done now.
10-23-2010 07:00 PM
johnnyandjebus
Blisters, yes another blisters thread

Hello all

Apologizes for starting up a new tread on a topic that,I am sure, has been well discussed here.

Every year when the boat gets pulled out I find approx 20 small blisters on either side of the hull, approx 1/4 to 1/2 inch in dia. 90+ percent of them are water trapped between the hull and the anti fouling paint. I pop them in the fall and let them dry out before sanding and re-painting in the spring.
If I suspect that the blistering has penetrated the glass in anyway, the blister is touched with a dremmel tool, dried out, sanded, and then filled with resin. No filler used.

Approx 10 years ago the hull was stripped of all anti fouling paint and approx 8 layers of fiberglass resin was applied, in an attempt to pre-actively seal the hull. At the time there was not an issue with blistering beyond what was described above. Done in the spring not the fall.

My question;
What causes this blisters to occur in the first place?
Am I not applying the anti fouling paint correctly?
Not prepping correctly?


thoughts?

John

 
Posting Rules
You may post new threads
You may post replies
You may post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -4. The time now is 11:02 AM.

Add to My Yahoo!         
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
(c) Marine.com LLC 2000-2012

The SailNet.com store is owned and operated by a company independent of the SailNet.com forum. You are now leaving the SailNet forum. Click OK to continue or Cancel to return to the SailNet forum.