|Topic Review (Newest First)|
|10-27-2010 02:21 PM|
|sailingdog||Be aware that Uship is just a shipping broker. They don't actually do any shipping, and add to the cost of you shipping something by tacking on a commission.|
|10-27-2010 02:12 PM|
I looked in to these folks when I was considering a Great Lakes boat. You have the opportunity to check their ratings and they bid on the haul job. Looks like you can save big $. Good luck
No personal experience with them. Only know what I read.
|10-27-2010 01:35 PM|
Originally Posted by DwayneSpeer View Post
|10-27-2010 12:59 PM|
There is also the option of going around the north end but it's not easy.
|10-27-2010 12:39 PM|
|Yorksailor||Truck it to Texas and sail from there.|
|10-27-2010 12:21 PM|
|AdamLein||Do you work? If so, sailing from the west coast to the east coast will be costly in that you will not be earning income for that time period, which will be several months.|
|10-27-2010 11:29 AM|
|dupek||Just wander, if I isolate the power cords from hull, would that slow down electrolysis process. I saw some of the wiring and the hull was "common ground". I would run heavy water tight isolation.|
|10-27-2010 11:16 AM|
Really, your best bet is to have it trucked.
Sailing, you only have 3 options.
Friendly: Down the West coast, through the Panama Canal, and back up through the gulf
Not Friendly: Keep heading south, and around Cape Horn.
Wacky: Just head west out of WA. You'll hit Florida eventually.
If that boat is "the one", then your best bet is to truck it home. Otherwise you are stuck in WA refitting it before a very long sail. Or stuck in TX refitting it before a gulf passage.
|10-27-2010 08:21 AM|
Stainless steel does not fare well when submersed in water for long periods of time. The lower grades suffer from chloride ION stress corrosion. Even the best grades don't do all that well in salt water.
The best metal to make boat hulls from is a cupro-nickel alloy. It is fairly strong and also does not require anti-fouling paint as a rule. It is rarely used due to the expense of the material. Some commercial ships are made using it to minimize long term maintenance costs. It is also far more resistant to galvanic corrosion issues than aluminum or steel boats are.
|10-27-2010 08:12 AM|
I was looking for few weeks to find answer. Why not stainless steel?
Could not find it. It could be the price or welding difficulty. Aluminum do not rust, but does crack under stress and electrolysis issue is bigger that in steel.
Steel boat require more maintenance, but then is more safe. I take the safe.
|This thread has more than 10 replies. Click here to review the whole thread.|