|Topic Review (Newest First)|
|11-01-2010 06:35 PM|
|ambianceack||I am not sure what kind of boat you have but I'll bet on the other end of that machine screw is a nut and washer. Was the toe rail raised up during the hit? If so, it might be possible the nuts and washers are up inside the space between the deck and underside. Consider looking at the underside of a section of toe rail that was not damaged.|
|11-01-2010 04:25 PM|
|saladpe||Thanks, yes, I have an estimate from a good yard. However, they want to replace the toe rail and I think it can be saved. I would like to repair the original.|
|11-01-2010 04:20 PM|
Originally Posted by sailingdog View Post
|11-01-2010 04:20 PM|
An electric impact wrench can be used with screwdriver bits as well as sockets, and will work just fine on slotted head screws.
BTW, PorFin's advice is sound... make sure that you can re-assemble the teak toe rail.
BTW, are you filing an insurance claim against the other boat owner for the damage? If so, you should get an estimate of the repair before doing any work.
Originally Posted by saladpe View Post
|11-01-2010 04:16 PM|
|saladpe||After a quick google search, it looks like the proper term for what I am seeing is binding head slotted machine screws. I don't see nuts and washers on the underside but I only have one exposed right now and need to remove some interior woodwork paneling to see the remainder (not super difficult). Regardless, I can access the underside so I should not have a problem re-assembling.|
|11-01-2010 04:05 PM|
Something comes to mind -- don't inadvertantly make this more difficult than it already is.
Have you confirmed that the fasteners holding your toe rail down are actually wood screws? It might be worth the time to make sure that they are not machine screws, complete with nuts/washers on the back side. If they are machine screws, consider before disassembly how you're gonna get them back together once you're done with your wood repair.
|11-01-2010 03:58 PM|
|saladpe||They are flat head screws with about 1/2" head. There is no hex shape outer edge to grip a wrench on. From what I can tell, there may not even be a nut on the underside of the deck (which was a little surprising) though it could have supported one. I will see what Home Depot has on electric impact wrenches this evening. So the higher torque will in theory allow the flat head screw bit to turn the screw without stripping? I won't have pictures until I can get to the yard this coming weekend. Its a really nice piece of teak and I have the skills to fix if I can get the thing off the boat. Thank you for the feedback.|
|11-01-2010 03:06 PM|
|sailingdog||I find that impact drivers are far less useful than an electric impact wrench. They're far more likely to cause damage than an electric impact wrench.|
|11-01-2010 12:20 PM|
I would use a impact screwdriver, check auto parts stores. I use them often for stubborn screws. They crack the screw loose. Pretty much assume they are screws and not bolts? I would guess screws.
|11-01-2010 12:16 PM|
|sailingdog||Use an electric impact wrench to remove them. It will likely be far easier, faster and more successful than using a powered screw gun, which will likely just strip the screws.|
|This thread has more than 10 replies. Click here to review the whole thread.|