|Topic Review (Newest First)|
|01-13-2011 03:31 PM|
|arf145||I'm with Minnewaska--I'd check the oil level--2GM takes 2 quarts I believe.|
|01-13-2011 01:24 PM|
Of all that work, bleeding the fuel lines is probably the most likely, IMHO. Try again?
Do you mean the oil breather is dripping oil? That's not terribly uncommon if it's a very little. If a notable amount, you may have blockage or blow by in the cylinders. If she ran well very recently and before you began this work, I would doubt either. Can I assume you are certain you didn't overfill the oil?
Edit: did you flip a compression release lever intentionally to bleed or by accident?
|01-13-2011 01:04 PM|
oil in air intake
Yanmar 2gm won't start since installing new starter, I've been working on other engine projects since the new starter like changing oil, fuel filters, changing zincs replacing worn hoses, and bleeding the lines. This past weekend I noticed oil coming out of the air intake. Any advice?