|Topic Review (Newest First)|
|07-31-2006 01:30 PM|
|'boattime||Thanks for the responses. I will forward this information. I was crewing for this boat in Spain, and have since left...|
|07-24-2006 01:57 PM|
My 4.108 has a Borg Warner Velvet Drive transmission. Rebuilt units are still available online. One company is marine gears that knows what they are doing,
|07-23-2006 10:15 AM|
There were several different transmissions mated to the 4-108. Possible problems would depend on which one you have - since they actually work in different ways.
I have a hydraulic transmission mated to a 4-107. It uses hydraulic pressure generated by the drive shaft to operate a clutch. When I blew the heat exchanger (it has its own heat exchanger) and a hole developed, the transmission fluid was rapidly pumped into the cooling water and then out the exhaust. So now the clutch was not held closed and the shaft did not turn. Replaced the heat exchanger, filled with new transmission fluid and have been using ever since (that was about 6 years ago).
A common way to lose fluid is when the seal on the prop shaft develops a leak. This is easy to fix, especially if you have already removed it. Cjeck the bilge for transmission fluid (frequently red).
|07-23-2006 04:50 AM|
Gearbox problems - Perkins 4108
The gearbox ran out of oil on a long passage (50hrs). There is no shaft movement when power is applied. You can turn the shaft by hand, but there is clanking noise coming from the box. We are currently taking the box off for inspection. Any suggestions? Is this repairable, or are we going to need a new one. (Met/Spain)