Our E-32 come with a new still in box Harken traveler but seems to wide to fit in the original spot. Is there a replacement that would fit?
01-24-2011 11:13 PM
Ours have been replaced with Harken. Seems to work well.
05-23-2010 09:06 PM
We have an '81 E 40. In '03 I did a number of upgrades prior to an extended cruise of the US east coast. To your point, I replaced the original traveler with a Garhauer 6:1 mainsheet control [can be used 6:1 or 3:1 depending on conditions]. The sheet block runs on a track with 3:1 contol lines at each end stopped by cam cleats. Be sure to size the sheet properly. I just put on a new 7/16" [11mm] Sta-Set. It seems good, but the season is early! The 9/16" I replaced was too large for my blocks. Overall, a good set-up.
03-22-2010 01:46 PM
anybody with E-42 traveller upgrades?
03-15-2010 07:03 PM
Traveller controls for Endeavours
I have an E-42 with traveller track on the aft of the cockpit coaming (CC).
Looking to add traveller control lines instead of pins. is there anybody making gear that will fit that track? i don't know the maker of the track. Really don't want to replace the track either.