|Topic Review (Newest First)|
|06-01-2011 11:53 AM|
|arf145||Looks like you nailed it, JimsCAL.|
|05-31-2011 10:13 PM|
Flex-Mold Non Skid Repair System - MAS Epoxies - Easy Epoxy Resin & Adhesives. Marine Epoxy for Boat Repair & Boat Building; Automotive Epoxy; Epoxy for Woodworking, Signs, Surfboards, Other. New: Eco-Friendly Acetone Replacement, Non-Skid Repair
|05-31-2011 09:41 PM|
How about make your own, go find some silicone molding compound. You can get it online or local if you look around.
If you get the stuff, it is easy to use and make a pattern. You could even fill the cracks if they are deep enough with wax, then make the mold, which will even fit the edge of the pattern.
You could even if your really cheap, just wax the heck out of the area and use normal caulk. you would only get one use out of it, but for four bucks what do you want.
Alumilite - Products - Silicone Rubber
|05-31-2011 09:26 PM|
Where can I Find Non-Skid Pattern?
Got some dings and a few stress cracks in the deck where the factory non-skid is. None are too big so i'd like to find some plastic sheet with the diamond design on it to lay down on the gelcoat after repairs while it cures. Any idea where to find it in small quantities?