SailNet Community - Reply to Topic
SailNet FAQ This forum is specifically on the Sailnet Website and how to do certain things on the website. Please note - any other threads will be deleted.

Thread: Cal21 Rebuild Questioins Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:

Register Now

In order to be able to post messages on the SailNet Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
Please note: After entering 3 characters a list of Usernames already in use will appear and the list will disappear once a valid Username is entered.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

  Additional Options
Miscellaneous Options

Click here to view the posting rules you are bound to when clicking the
'Submit Reply' button below

  Topic Review (Newest First)
01-25-2013 12:40 PM
Re: Cal21 Rebuild Questioins

Coral - would love to hear an update, maybe pictures??
09-06-2011 11:51 PM
lat42north I replaced the wood that the deck/hull joint uses with mahogany. My chain plates also fell off, I glassed new ones in. I changed the layout a bit, a v-berth with storage under it. about 24" of compartment/shelves aft of that, then 2 quarter berths. I compartmented off the rear lazerette from the rest of the cabin. I glassed in 1/2" ply on both sides of the centerboard trunk, I wanted it to be stronger in case of a knockdown (glad I did!). New SS keel bolt, put Bomar hatch in the front of the cabintop for flow through ventilation. I had NO through hulls.
I have pics... I'll dig them up and scan them (35mm).

When I put the hull/deck back I also used 3M 5200 between the joint. When I had everything back together, it was one stiff boat!!!

Make sure you put some temporary braces across the hull to hold it in the same shape/width as when it came off from the cabintop!!!! You want them to fit very well when they go back together!!!

Larry C
09-06-2011 10:06 PM
coralgardener Hey Larry,
I think she sweet too, and with that keel I don't know how she couldn't stay upright.
so did you have to replace the shear strips that the deck screws fastened into? if so what lumber did you choose? mine were disintegrating before my eyes is mainly why I lifted the deck. do you have any photos of her?
I'll probably try to keep the interior as original as possible, though I wish I would of taken more photos before I took the hose in and dismantled it into a pile of compost.
The mast fell (no damage to it) when the interior rotted and the chainplate pulled through and the bolts ripped a hole through the deck, so It will become a good learning experience for me to start.
anyhow... any advice would be greatly appreciated.

09-05-2011 09:05 PM
lat42north I bought a Cal 21 in 99', it also had about a foot of water in it. Everything inside was mush. I split the hull/deck, removed the keel & started from scratch. I didn't use marine ply as I knew I would be covering it all with fiberglass/epoxy. Took me 6 months to get it all finished. Then I took it down to the Gulf of Mexico for about 4 months of sea trials... someone in Texas fell in love with it and I came back with full pockets but no boat or trailer. I didn't have nay problems with the keel, the thing sailed like a witch, she would heel about 25 deg. and then just GO!. I put roller furling on her with a 140 genny, new main, auto-pilot... man that was a sweet boat!!!!

Larry C
07-28-2011 02:27 PM
OtterGreen PS, i hope this was something you acquired and nothing you paid any sort of currency for.
07-28-2011 02:23 PM
OtterGreen we had one years ago for 3 years. the nightmare ended when we sold it. FYI, that heavy 500 lb swing keel is notorious for the cable snapping, fouling on the drum, flatspots and sliding through the grips on the keel point. the angles demanded are too severe for proper use. at least 5 times a season someone would draw straws to see who was going under the hull and come up looking like a smurf. i dont mean to sound mean, but it sounds like you have quite a project on your hands that will need professional attention. if you cant do it yourself or feel unconfident, then hire someone who does. trust me weve all learned at one point or another trying to accomplish jobs too far out of our reach. good luck
07-07-2011 09:51 PM
Cal21 Rebuild Questioins

Hi All,
I'm new to sailing so I've grabbed every how to book the local library system has on sailing, maintenance, wiring, anything I could find there. I love to keep myself busy with projects and did I ever rope myself a huge one here. a cal21 that was the countyís biggest mosquito farm, it had two foot of water in it for who knows how long, the whole interior turned to compost.
anyhow I know to use marine plywood to rebuild the bulkheads and bunks, floors and all, but what would anyone suggest the secondary wood that holds the plywood together that you run the screws into?
I've also separated the deck from the hull because the sheer clamps or strips (at least thatís what they are called in kayak construction) they are disintegrating with every touch. any clue what to use here? I figure I will need to scarf these, as 21 foot lumber of any kind in Ohio is imposable to find.
I've tried to ask some repair shops around the area and they wonít give out any kind of trade secrets, all they say is bring it in and we can give you an estimate. nope we can't tell you anything without seeing it so I brought pictures even and they say sorry bring it in and...
I found five sheets of okoume the other day so Iím chomping at the bit to get started. bought a n angle grinder yesterday and started to get rid of the old tabs.
Oh also what would be the best way to seal it once Iím finished, some say encapsulate it in fiberglass, others say paint it , then I read it must breathe, itís all so confusing?
any advice would be greatly appreciated,
Thank You

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

For the best viewing experience please update your browser to Google Chrome