|Topic Review (Newest First)|
|09-03-2011 01:27 AM|
|xymotic||+1 to what they said above, make sure both units are communicating at same "baud" or speed, and enable ais on ray unir and let us know how you fare.|
|09-02-2011 09:29 PM|
|r.furborough||then you need to set the 2D overlay to show the AIS targets|
|09-02-2011 08:47 PM|
|night0wl||Check the C70 for NMEA port speeds...you may need to set it to 38400|
|09-02-2011 02:47 PM|
Thanks. I have done the NMEA wiring connections but the Raymarine C70 does not recognize the AIS signal!
|09-01-2011 12:16 PM|
Originally Posted by RUI C View Post
I'm not familiar with the rc10, but looking at the web page it says it does NMEA.
so the connection should be a straightfoward NMEA wiring with the out on the AIS going to the IN on the c70.
HOWEVER, many AIS recievers use a different baud rate (speed) and if that's the case you may need a multiplexor.
|08-23-2011 06:50 AM|
Connecting a ais rc10 to a raymarine c70
any one can explain how do i connect a ais rc10 to a c70 raymarine?